FILE(1) FILE(1)
NAME
file - determine file type
SYNOPSIS
file [ -bcdhikLnNprsvz ] [ -f namefile ] [ -F separator ] [ -M magicfiles ] [ -m magicfiles ] file
...
file -C [ -m magicfile ]
DESCRIPTION
This manual page documents version 4.17 of the file command.
File tests each argument in an attempt to classify it. There are three sets of tests, performed in
this order: filesystem tests, magic number tests, and language tests. The first test that succeeds
causes the file type to be printed.
The type printed will usually contain one of the words text (the file contains only printing charac-ters characters
ters and a few common control characters and is probably safe to read on an ASCII terminal), exe-cutable executable
cutable (the file contains the result of compiling a program in a form understandable to some UNIX
kernel or another), or data meaning anything else (data is usually `binary' or non-printable).
Exceptions are well-known file formats (core files, tar archives) that are known to contain binary
data. When modifying the file /usr/share/file/magic or the program itself, preserve these keywords .
People depend on knowing that all the readable files in a directory have the word ``text'' printed.
Don't do as Berkeley did and change ``shell commands text'' to ``shell script''. Note that the file
/usr/share/file/magic is built mechanically from a large number of small files in the subdirectory
Magdir in the source distribution of this program.
The filesystem tests are based on examining the return from a stat(2) system call. The program
checks to see if the file is empty, or if it's some sort of special file. Any known file types
appropriate to the system you are running on (sockets, symbolic links, or named pipes (FIFOs) on
those systems that implement them) are intuited if they are defined in the system header file
<sys/stat.h>.
The magic number tests are used to check for files with data in particular fixed formats. The canon-ical canonical
ical example of this is a binary executable (compiled program) a.out file, whose format is defined in
a.out.h and possibly exec.h in the standard include directory. These files have a `magic number'
stored in a particular place near the beginning of the file that tells the UNIX operating system that
the file is a binary executable, and which of several types thereof. The concept of `magic number'
has been applied by extension to data files. Any file with some invariant identifier at a small
fixed offset into the file can usually be described in this way. The information identifying these
files is read from the compiled magic file /usr/share/file/magic.mgc , or /usr/share/file/magic if
the compile file does not exist. In addition file will look in $HOME/.magic.mgc , or $HOME/.magic for
magic entries.
If a file does not match any of the entries in the magic file, it is examined to see if it seems to
be a text file. ASCII, ISO-8859-x, non-ISO 8-bit extended-ASCII character sets (such as those used
on Macintosh and IBM PC systems), UTF-8-encoded Unicode, UTF-16-encoded Unicode, and EBCDIC character
sets can be distinguished by the different ranges and sequences of bytes that constitute printable
text in each set. If a file passes any of these tests, its character set is reported. ASCII,
ISO-8859-x, UTF-8, and extended-ASCII files are identified as ``text'' because they will be mostly
readable on nearly any terminal; UTF-16 and EBCDIC are only ``character data'' because, while they
contain text, it is text that will require translation before it can be read. In addition, file will
attempt to determine other characteristics of text-type files. If the lines of a file are terminated
by CR, CRLF, or NEL, instead of the Unix-standard LF, this will be reported. Files that contain
embedded escape sequences or overstriking will also be identified.
Once file has determined the character set used in a text-type file, it will attempt to determine in
what language the file is written. The language tests look for particular strings (cf names.h) that
can appear anywhere in the first few blocks of a file. For example, the keyword .br indicates that
the file is most likely a troff(1) input file, just as the keyword struct indicates a C program.
These tests are less reliable than the previous two groups, so they are performed last. The language
test routines also test for some miscellany (such as tar(1) archives).
Any file that cannot be identified as having been written in any of the character sets listed above
is simply said to be ``data''.
OPTIONS
-b, --brief
Do not prepend filenames to output lines (brief mode).
-c, --checking-printout
Cause a checking printout of the parsed form of the magic file. This is usually used in con-junction conjunction
junction with -m to debug a new magic file before installing it.
-C, --compile
Write a magic.mgc output file that contains a pre-parsed version of file.
-f, --files-from namefile
Read the names of the files to be examined from namefile (one per line) before the argument
list. Either namefile or at least one filename argument must be present; to test the stan-dard standard
dard input, use ``-'' as a filename argument.
-F, --separator separator
Use the specified string as the separator between the filename and the file result returned.
Defaults to ``:''.
-h, --no-dereference
option causes symlinks not to be followed (on systems that support symbolic links). This is
the default if the environment variable POSIXLY_CORRECT is not defined.
-I, --mime
Causes the file command to output mime type strings rather than the more traditional human
readable ones. Thus it may say ``text/plain; charset=us-ascii'' rather than ``ASCII text''.
In order for this option to work, file changes the way it handles files recognised by the
command itself (such as many of the text file types, directories etc), and makes use of an
alternative ``magic'' file. (See ``FILES'' section, below).
-i If the file is a regular file do not classify its contents.
-k, --keep-going
Don't stop at the first match, keep going.
-L, --dereference
option causes symlinks to be followed, as the like-named option in ls(1) (on systems that
support symbolic links). This is the default if the environment variable POSIXLY_CORRECT is
defined.
-m, --magic-file list
Specify an alternate list of files containing magic numbers. This can be a single file, or a
colon-separated list of files. If a compiled magic file is found alongside, it will be used
instead. With the -I or --mime option, the program adds ".mime" to each file name.
-m list Like -m, except the default rules are not applied.
-n, --no-buffer
Force stdout to be flushed after checking each file. This is only useful if checking a list
of files. It is intended to be used by programs that want filetype output from a pipe.
-d Apply default system tests, this is the default if neither -m nor -M are supplied.
-N, --no-pad
Don't pad filenames so that they align in the output.
-p, --preserve-date
On systems that support utime(2) or utimes(2), attempt to preserve the access time of files
analyzed, to pretend that file(2) never read them.
-r, --raw
No operation, included for historical compatability. -s, --special-files Normally, file only
attempts to read and determine the type of argument files which stat(2) reports are ordinary
files. This prevents problems, because reading special files may have peculiar consequences.
Specifying the -s option causes file to also read argument files which are block or character
special files. This is useful for determining the filesystem types of the data in raw disk
partitions, which are block special files. This option also causes file to disregard the
file size as reported by stat(2) since on some systems it reports a zero size for raw disk
partitions.
-v, --version
Print the version of the program and exit.
-z, --uncompress
Try to look inside compressed files.
--help Print a help message and exit.
FILES
/usr/share/file/magic.mgc
Default compiled list of magic numbers
/usr/share/file/magic
Default list of magic numbers
/usr/share/file/magic.mime.mgc
Default compiled list of magic numbers, used to output mime types when the -i option is speci-fied. specified.
fied.
/usr/share/file/magic.mime
Default list of magic numbers, used to output mime types when the -i option is specified.
ENVIRONMENT
The environment variable MAGIC can be used to set the default magic number file name. If that vari-able variable
able is set, then file will not attempt to open $HOME/.magic . file adds ".mime" and/or ".mgc" to
the value of this variable as appropriate. The environment variable POSIXLY_CORRECT controls (on
systems that support symbolic links), if file will attempt to follow symlinks or not. If set, then
file follows symlink, otherwise it does not. This is also controlled by the L and h options.
LEGACY SYNOPSIS
file [ -bchikLnNprsvz ] [ -f namefile ] [ -F separator ] [ -m magicfiles ] file ...
file -C [ -m magicfile ]
LEGACY DESCRIPTION
As above, except:
-i, --mime
Causes the file command to output mime type strings rather than the more traditional human
readable ones. Thus it may say ``text/plain; charset=us-ascii'' rather than ``ASCII text''.
In order for this option to work, file changes the way it handles files recognised by the
command itself (such as many of the text file types, directories etc), and makes use of an
alternative ``magic'' file. (See ``FILES'' section, below).
-r, --raw
Don't translate unprintable characters to \ooo. Normally file translates unprintable charac-ters characters
ters to their octal representation.
For more information about legacy mode, see compat(5).
SEE ALSO
magic(5) - description of magic file format.
strings(1), od(1), hexdump(1), compat(5) - tools for examining non-textfiles. otool(1), otool64(1) -Mach-O otool64(1)Mach-O
Mach-O object display tools
STANDARDS CONFORMANCE
This program conforms to Its behaviour is mostly compatible with the System V program of the same
name. This version knows more magic, however, so it will produce different (albeit more accurate)
output in many cases.
The one significant difference between this version and System V is that this version treats any
white space as a delimiter, so that spaces in pattern strings must be escaped. For example,
>10 string language impress (imPRESS data)
in an existing magic file would have to be changed to
>10 string language\ impress (imPRESS data)
In addition, in this version, if a pattern string contains a backslash, it must be escaped. For
example
0 string \begindata Andrew Toolkit document
in an existing magic file would have to be changed to
0 string \\begindata Andrew Toolkit document
SunOS releases 3.2 and later from Sun Microsystems include a file(1) command derived from the System
V one, but with some extensions. My version differs from Sun's only in minor ways. It includes the
extension of the `&' operator, used as, for example,
>16 long&0x7fffffff >0 not stripped
MAGIC DIRECTORY
The magic file entries have been collected from various sources, mainly USENET, and contributed by
various authors. Christos Zoulas (address below) will collect additional or corrected magic file
entries. A consolidation of magic file entries will be distributed periodically.
The order of entries in the magic file is significant. Depending on what system you are using, the
order that they are put together may be incorrect. If your old file command uses a magic file, keep
the old magic file around for comparison purposes (rename it to /usr/share/file/magic.orig).
EXAMPLES
$ file file.c file /dev/{wd0a,hda}
file.c: C program text
file: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV),
dynamically linked (uses shared libs), stripped
/dev/wd0a: block special (0/0)
/dev/hda: block special (3/0)
$ file -s /dev/wd0{b,d}
/dev/wd0b: data
/dev/wd0d: x86 boot sector
$ file -s /dev/hda{,1,2,3,4,5,6,7,8,9,10}
/dev/hda: x86 boot sector
/dev/hda1: Linux/i386 ext2 filesystem
/dev/hda2: x86 boot sector
/dev/hda3: x86 boot sector, extended partition table
/dev/hda4: Linux/i386 ext2 filesystem
/dev/hda5: Linux/i386 swap file
/dev/hda6: Linux/i386 swap file
/dev/hda7: Linux/i386 swap file
/dev/hda8: Linux/i386 swap file
/dev/hda9: empty
/dev/hda10: empty
$ file -i file.c file /dev/{wd0a,hda}
file.c: text/x-c
file: application/x-executable, dynamically linked (uses shared libs),
not stripped
/dev/hda: application/x-not-regular-file
/dev/wd0a: application/x-not-regular-file
HISTORY
There has been a file command in every UNIX since at least Research Version 4 (man page dated Novem-ber, November,
ber, 1973). The System V version introduced one significant major change: the external list of magic
number types. This slowed the program down slightly but made it a lot more flexible.
This program, based on the System V version, was written by Ian Darwin <ian@darwinsys.com> without
looking at anybody else's source code.
John Gilmore revised the code extensively, making it better than the first version. Geoff Collyer
found several inadequacies and provided some magic file entries. Contributions by the `&' operator
by Rob McMahon, cudcv@warwick.ac.uk, 1989.
Guy Harris, guy@netapp.com, made many changes from 1993 to the present.
Primary development and maintenance from 1990 to the present by Christos Zoulas (chris-tos@astron.com). (christos@astron.com).
tos@astron.com).
Altered by Chris Lowth, chris@lowth.com, 2000: Handle the ``-i'' option to output mime type strings
and using an alternative magic file and internal logic.
Altered by Eric Fischer (enf@pobox.com), July, 2000, to identify character codes and attempt to iden-tify identify
tify the languages of non-ASCII files.
The list of contributors to the "Magdir" directory (source for the /usr/share/file/magic file) is too
long to include here. You know who you are; thank you.
LEGAL NOTICE
Copyright (c) Ian F. Darwin, Toronto, Canada, 1986-1999. Covered by the standard Berkeley Software
Distribution copyright; see the file LEGAL.NOTICE in the source distribution.
The files tar.h and is_tar.c were written by John Gilmore from his public-domain tar program, and are
not covered by the above license.
BUGS
There must be a better way to automate the construction of the Magic file from all the glop in
magdir. What is it? Better yet, the magic file should be compiled into binary (say, ndbm(3) or,
better yet, fixed-length ASCII strings for use in heterogenous network environments) for faster
startup. Then the program would run as fast as the Version 7 program of the same name, with the
flexibility of the System V version.
File uses several algorithms that favor speed over accuracy, thus it can be misled about the contents
of text files.
The support for text files (primarily for programming languages) is simplistic, inefficient and
requires recompilation to update.
There should be an ``else'' clause to follow a series of continuation lines.
The magic file and keywords should have regular expression support. Their use of ASCII TAB as a
field delimiter is ugly and makes it hard to edit the files, but is entrenched.
It might be advisable to allow upper-case letters in keywords for e.g., troff(1) commands vs man page
macros. Regular expression support would make this easy.
The program doesn't grok FORTRAN. It should be able to figure FORTRAN by seeing some keywords which
appear indented at the start of line. Regular expression support would make this easy.
The list of keywords in ascmagic probably belongs in the Magic file. This could be done by using
some keyword like `*' for the offset value.
Another optimisation would be to sort the magic file so that we can just run down all the tests for
the first byte, first word, first long, etc, once we have fetched it. Complain about conflicts in
the magic file entries. Make a rule that the magic entries sort based on file offset rather than
position within the magic file?
The program should provide a way to give an estimate of ``how good'' a guess is. We end up removing
guesses (e.g. ``From '' as first 5 chars of file) because they are not as good as other guesses (e.g.
``Newsgroups:'' versus ``Return-Path:''). Still, if the others don't pan out, it should be possible
to use the first guess.
This program is slower than some vendors' file commands. The new support for multiple character
codes makes it even slower.
This manual page, and particularly this section, is too long.
AVAILABILITY
You can obtain the original author's latest version by anonymous FTP on ftp.astron.com in the direc-tory directory
tory /pub/file/file-X.YZ.tar.gz
Copyright but distributable FILE(1)
|