LDAPSEARCH(1) LDAPSEARCH(1)
NAME
ldapsearch - LDAP search tool
SYNOPSIS
ldapsearch [-n] [-u] [-v] [-t] [-A] [-L[L[L]]] [-M[M]] [-d debuglevel] [-f file] [-D binddn] [-W]
[-w passwd] [-y passwdfile] [-H ldapuri] [-h ldaphost] [-p ldapport] [-P 2|3] [-b searchbase]
[-s base|one|sub|children] [-a never|always|search|find] [-l timelimit] [-z sizelimit] [-O security-properties] securityproperties]
properties] [-I] [-Q] [-U authcid] [-R realm] [-x] [-X authzid] [-Y mech] [-Z[Z]] filter [attrs...]
DESCRIPTION
ldapsearch is a shell-accessible interface to the ldap_search(3) library call.
ldapsearch opens a connection to an LDAP server, binds, and performs a search using specified parame-ters. parameters.
ters. The filter should conform to the string representation for search filters as defined in RFC
2254. If not provided, the default filter, (objectClass=*), is used.
If ldapsearch finds one or more entries, the attributes specified by attrs are returned. If * is
listed, all user attributes are returned. If + is listed, all operational attributes are returned.
If no attrs are listed, all user attributes are returned. If only 1.1 is listed, no attributes will
be returned.
OPTIONS
-n Show what would be done, but don't actually perform the search. Useful for debugging in con-junction conjunction
junction with -v.
-u Include the User Friendly Name form of the Distinguished Name (DN) in the output.
-v Run in verbose mode, with many diagnostics written to standard output.
-t Write retrieved non-printable values to a set of temporary files. This is useful for dealing
with values containing non-character data such as jpegPhoto or audio.
-A Retrieve attributes only (no values). This is useful when you just want to see if an
attribute is present in an entry and are not interested in the specific values.
-L Search results are display in LDAP Data Interchange Format detailed in ldif(5). A single -L
restricts the output to LDIFv1. A second -L disables comments. A third -L disables printing
of the LDIF version. The default is to use an extended version of LDIF.
-M[M] Enable manage DSA IT control. -MM makes control critical.
-S attribute
Sort the entries returned based on attribute. The default is not to sort entries returned. If
attribute is a zero-length string (""), the entries are sorted by the components of their Dis-tinguished Distinguished
tinguished Name. See ldap_sort(3) for more details. Note that ldapsearch normally prints out
entries as it receives them. The use of the -S option defeats this behavior, causing all
entries to be retrieved, then sorted, then printed.
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapsearch must be compiled with LDAP_DEBUG
defined for this option to have any effect.
-f file
Read a series of lines from file, performing one LDAP search for each line. In this case, the
filter given on the command line is treated as a pattern where the first occurrence of %s is
replaced with a line from file. If file is a single - character, then the lines are read from
standard input.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP directory.
-W Prompt for simple authentication. This is used instead of specifying the password on the com-mand command
mand line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for simple authentication.
-H ldapuri
Specify URI(s) referring to the ldap server(s); only the protocol/host/port fields are
allowed; a list of URI, separated by whitespace or commas is expected.
-h ldaphost
Specify an alternate host on which the ldap server is running. Deprecated in favor of -H.
-p ldapport
Specify an alternate TCP port where the ldap server is listening. Deprecated in favor of -H.
-b searchbase
Use searchbase as the starting point for the search instead of the default.
-s base|one|sub|children
Specify the scope of the search to be one of base, one, sub, or children to specify a base
object, one-level, subtree, or children search. The default is sub. Note: children scope
requires LDAPv3 subordinate feature extension.
-a never|always|search|find
Specify how aliases dereferencing is done. Should be one of never, always, search, or find to
specify that aliases are never dereferenced, always dereferenced, dereferenced when searching,
or dereferenced only when locating the base object for the search. The default is to never
dereference aliases.
-P 2|3 Specify the LDAP protocol version to use.
-l timelimit
wait at most timelimit seconds for a search to complete. A timelimit of 0 (zero) or none
means no limit. A timelimit of max means the maximum integer allowable by the protocol. A
server may impose a maximal timelimit which only the root user may override.
-z sizelimit
retrieve at most sizelimit entries for a search. A sizelimit of 0 (zero) or none means no
limit. A sizelimit of max means the maximum integer allowable by the protocol. A server may
impose a maximal sizelimit which only the root user may override.
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is to prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-U authcid
Specify the authentication ID for SASL bind. The form of the ID depends on the actual SASL
mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The form of the realm depends on the
actual SASL mechanism used.
-X authzid
Specify the requested authorization ID for SASL bind. authzid must be one of the following
formats: dn:<distinguished name> or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication. If it's not specified, the program
will choose the best mechanism the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended operation. If you use -ZZ, the command will
require the operation to be successful.
OUTPUT FORMAT
If one or more entries are found, each entry is written to standard output in LDAP Data Interchange
Format or ldif(5):
version: 1
# bjensen, example, net
dn: uid=bjensen,dc=example,dc=net
objectClass: person
objectClass: dcObject
uid: bjensen
cn: Barbara Jensen
sn: Jensen
...
If the -t option is used, the URI of a temporary file is used in place of the actual value. If the
-A option is given, only the "attributename" part is written.
EXAMPLE
The following command:
ldapsearch -LLL "(sn=smith)" cn sn telephoneNumber
will perform a subtree search (using the default search base and other parameters defined in
ldap.conf(5)) for entries with a surname (sn) of smith. The common name (cn), surname (sn) and tele-phoneNumber telephoneNumber
phoneNumber values will be retrieved and printed to standard output. The output might look something
like this if two entries are found:
dn: uid=jts,dc=example,dc=com
cn: John Smith
cn: John T. Smith
sn: Smith
sn;lang-en: Smith
sn;lang-de: Schmidt
telephoneNumber: 1 555 123-4567
dn: uid=sss,dc=example,dc=com
cn: Steve Smith
cn: Steve S. Smith
sn: Smith
sn;lang-en: Smith
sn;lang-de: Schmidt
telephoneNumber: 1 555 765-4321
The command:
ldapsearch -LLL -u -t "(uid=xyz)" jpegPhoto audio
will perform a subtree search using the default search base for entries with user id of "xyz". The
user friendly form of the entry's DN will be output after the line that contains the DN itself, and
the jpegPhoto and audio values will be retrieved and written to temporary files. The output might
look like this if one entry with one value for each of the requested attributes is found:
dn: uid=xyz,dc=example,dc=com
ufn: xyz, example, com
audio:< file:///tmp/ldapsearch-audio-a19924
jpegPhoto:< file:///tmp/ldapsearch-jpegPhoto-a19924
This command:
ldapsearch -LLL -s one -b "c=US" "(o=University*)" o description
will perform a one-level search at the c=US level for all entries whose organization name (o) begins
begins with University. The organization name and description attribute values will be retrieved and
printed to standard output, resulting in output similar to this:
dn: o=University of Alaska Fairbanks,c=US
o: University of Alaska Fairbanks
description: Preparing Alaska for a brave new yesterday
description: leaf node only
dn: o=University of Colorado at Boulder,c=US
o: University of Colorado at Boulder
description: No personnel information
description: Institution of education and research
dn: o=University of Colorado at Denver,c=US
o: University of Colorado at Denver
o: UCD
o: CU/Denver
o: CU-Denver
description: Institute for Higher Learning and Research
dn: o=University of Florida,c=US
o: University of Florida
o: UFl
description: Warper of young minds
...
DIAGNOSTICS
Exit status is zero if no errors occur. Errors result in a non-zero exit status and a diagnostic
message being written to standard error.
SEE ALSO
ldapadd(1), ldapdelete(1), ldapmodify(1), ldapmodrdn(1), ldap.conf(5), ldif(5), ldap(3),
ldap_search(3)
AUTHOR
The OpenLDAP Project <http://www.openldap.org/
ACKNOWLEDGEMENTS
OpenLDAP is developed and maintained by The OpenLDAP Project (http://www.openldap.org/) OpenLDAP is
derived from University of Michigan LDAP 3.3 Release.
OpenLDAP 2.3.27 2006/08/19 LDAPSEARCH(1)
|