IPFIREWALL(4) BSD Kernel Interfaces Manual IPFIREWALL(4)
NAME
ipfirewall -- IP packet filter and traffic accounting
SYNOPSIS
#include <sys/types.h>
#include <sys/queue.h>
#include <netinet/in.h>
#include <netinet/ip_fw.h>
int
setsockopt(raw_socket, IPPROTO_IP, ipfw option, struct ipfw, size);
DESCRIPTION
IPFirewall (sometimes referred to as "ipfw") is a system facility which allows filtering, redirecting,
and other operations on IP packets travelling through network interfaces. Packets are matched by
applying an ordered list of pattern rules against each packet until a match is found, at which point
the corresponding action is taken. Rules are numbered from 1 to 65534; multiple rules may share the
same number.
There is one rule that always exists, rule number 65535. This rule normally causes all packets to be
dropped. Hence, any packet which does not match a lower numbered rule will be dropped. However, the
kernel compile time option IPFIREWALL_DEFAULT_TO_ACCEPT allows the administrator to change this fixed
rule to permit everything.
The buffer passed down via the socket-option call should contain a "struct ip_fw" that is initialized
with the required parameters for the firewall command being invoked. This structure is consistently
required for every firewall command, even though in some cases the majority of its fields will go
unused. The reason for this is the API versioning that the firewall supports for the sake of backward
compatibility. The version field of this structure should always be set to IP_FW_CURRENT_API_VERSION
or an EINVAL error will be returned.
Commands
The following socket options are used to manage the rule list:
IP_FW_ADD inserts the rule into the rule list
IP_FW_DEL deletes all rules having the matching rule number
IP_FW_GET returns the (first) rule having the matching rule number
IP_FW_ZERO zeros the statistics associated with all rules having the matching rule number. If the
rule number is zero, all rules are zeroed.
IP_FW_FLUSH removes all rules (except 65535).
When the kernel security level is greater than 2, only IP_FW_GET is allowed.
Rule Structure
Rules are described by the following structure:
/* One ipfw rule */
struct ip_fw {
u_int32_t version; /* Version of this structure. Should always be */
/* set to IP_FW_CURRENT_API_VERSION by clients. */
void *context; /* Context that is usable by user processes to */
/* identify this rule. */
u_int64_t fw_pcnt,fw_bcnt; /* Packet and byte counters */
struct in_addr fw_src, fw_dst; /* Source and destination IP addr */
struct in_addr fw_smsk, fw_dmsk; /* Mask for src and dest IP addr */
u_short fw_number; /* Rule number */
u_int fw_flg; /* Flags word */
#define IP_FW_MAX_PORTS 10 /* A reasonable maximum */
union {
u_short fw_pts[IP_FW_MAX_PORTS]; /* Array of port numbers to match */
#define IP_FW_ICMPTYPES_MAX 128
#define IP_FW_ICMPTYPES_DIM (IP_FW_ICMPTYPES_MAX / (sizeof(unsigned) * 8))
unsigned fw_icmptypes[IP_FW_ICMPTYPES_DIM]; /* ICMP types bitmap */
} fw_uar;
u_int fw_ipflg; /* IP flags word */
u_char fw_ipopt,fw_ipnopt; /* IP options set/unset */
u_char fw_tcpopt,fw_tcpnopt; /* TCP options set/unset */
u_char fw_tcpf,fw_tcpnf; /* TCP flags set/unset */
long timestamp; /* timestamp (tv_sec) of last match */
union ip_fw_if fw_in_if, fw_out_if; /* Incoming and outgoing interfaces */
union {
u_short fu_divert_port; /* Divert/tee port (options IPDIVERT) */
u_short fu_pipe_nr; /* queue number (option DUMMYNET) */
u_short fu_skipto_rule; /* SKIPTO command rule number */
u_short fu_reject_code; /* REJECT response code */
struct sockaddr_in fu_fwd_ip;
} fw_un;
u_char fw_prot; /* IP protocol */
/*
* N'of src ports and # of dst ports in ports array (dst ports
* follow src ports; max of 10 ports in all; count of 0 means
* match all ports)
*/
u_char fw_nports;
void *pipe_ptr; /* flow_set ptr for dummynet pipe */
void *next_rule_ptr ; /* next rule in case of match */
uid_t fw_uid; /* uid to match */
int fw_logamount; /* amount to log */
u_int64_t fw_loghighest; /* highest number packet to log */
};
The ip_fw.h header also contains macros for setting the fw_ports field and various
flags and constants for setting other fields.
Rule Actions
Each rule has an action described by the IP_FW_F_COMMAND bits in the flags word:
IP_FW_F_DENY drop packet
IP_FW_F_REJECT drop packet; send rejection via ICMP or TCP
IP_FW_F_ACCEPT accept packet
IP_FW_F_COUNT increment counters; continue matching
IP_FW_F_DIVERT divert packet to a divert(4) socket
IP_FW_F_TEE copy packet to a divert(4) socket; continue
IP_FW_F_SKIPTO skip to rule number fu_skipto_rule
In the case of IP_FW_F_REJECT, if the fu_reject_code is a number from 0 to 255, then an ICMP unreach-able unreachable
able packet is sent back to the original packet's source IP address, with the corresponding code. Oth-erwise, Otherwise,
erwise, the value must be 256 and the protocol IPPROTO_TCP, in which case a TCP reset packet is sent
instead.
With IP_FW_F_SKIPTO, all succeeding rules having rule number less than fu_skipto_rule are skipped.
Kernel Options
Options in the kernel configuration file:
options IPFIREWALL enable ipfirewall
options IPFIREWALL_VERBOSE enable firewall logging
options IPFIREWALL_VERBOSE_LIMIT limit firewall logging
options IPDIVERT enable divert(4) sockets
When packets match a rule with the IP_FW_F_PRN bit set, and if IPFIREWALL_VERBOSE has been enabled,a
message is written to /dev/klog with the LOG_SECURITY facility (see syslog(3)) for further logging by
syslogd(8); IPFIREWALL_VERBOSE_LIMIT limits the maximum number of times each rule can cause a log mes-sage. message.
sage. These variables are also available via the sysctl(3) interface.
RETURN VALUES
The setsockopt() function returns 0 on success. Otherwise, -1 is returned and the global variable
errno is set to indicate the error.
ERRORS
The setsockopt() function will fail if:
[EINVAL] The IP option field was improperly formed; an option field was shorter than the min-imum minimum
imum value or longer than the option buffer provided.
[EINVAL] A structural error in ip_fw structure occurred (n_src_p+n_dst_p too big, ports set
for ALL/ICMP protocols etc.).
[EINVAL] The version field of the ip_fw structure was set to a value not supported by the
currently-installed IPFirewall, or no ip_fw structure was passed to it at all.
[EINVAL] An invalid rule number was used.
SEE ALSO
setsockopt(2), divert(4), ip(4), ipfw(8), sysctl(8), syslogd(8)
BUGS
The ``tee'' rule is not yet implemented (currently it has no effect).
This man page still needs work.
HISTORY
The ipfw facility was initially written as package to BSDI by Daniel Boulet <danny@BouletFermat.ab.ca>.
It has been heavily modified and ported to FreeBSD by Ugen J.S. Antsilevich <ugen@NetVision.net.il>.
Several enhancements added by Archie Cobbs <archie@FreeBSD.org>.
Darwin June 22, 1997 Darwin
|