HEADER_CHECKS(5) HEADER_CHECKS(5)
NAME
header_checks - Postfix built-in content inspection
SYNOPSIS
header_checks = pcre:/etc/postfix/header_checks
mime_header_checks = pcre:/etc/postfix/mime_header_checks
nested_header_checks = pcre:/etc/postfix/nested_header_checks
body_checks = pcre:/etc/postfix/body_checks
postmap -q "string" pcre:/etc/postfix/filename
postmap -q - pcre:/etc/postfix/filename <inputfile
DESCRIPTION
This document describes access control on the content of message headers and message body lines; it
is implemented by the Postfix cleanup(8) server before mail is queued. See access(5) for access con-
trol on remote SMTP client information.
Each message header or message body line is compared against a list of patterns. When a match is
found the corresponding action is executed, and the matching process is repeated for the next message
header or message body line.
For examples, see the EXAMPLES section at the end of this manual page.
Postfix header or body_checks are designed to stop a flood of mail from worms or viruses; they do not
decode attachments, and they do not unzip archives. See the documents referenced below in the README
FILES section if you need more sophisticated content analysis.
Postfix supports four built-in content inspection classes:
header_checks
These are applied to initial message headers (except for the headers that are processed with
mime_header_checks).
mime_header_checks (default: $header_checks)
These are applied to MIME related message headers only.
This feature is available in Postfix 2.0 and later.
nested_header_checks (default: $header_checks)
These are applied to message headers of attached email messages (except for the headers that
are processed with mime_header_checks).
This feature is available in Postfix 2.0 and later.
body_checks
These are applied to all other content, including multi-part message boundaries.
With Postfix versions before 2.0, all content after the initial message headers is treated as
body content.
Note: message headers are examined one logical header at a time, even when a message header spans
multiple lines. Body lines are always examined one line at a time.
COMPATIBILITY
With Postfix version 2.2 and earlier specify "postmap -fq" to query a table that contains case sensi-tive sensitive
tive patterns. By default, regexp: and pcre: patterns are case insensitive.
TABLE FORMAT
This document assumes that header and body_checks rules are specified in the form of Postfix regular
expression lookup tables. Usually the best performance is obtained with pcre (Perl Compatible Regular
Expression) tables, but the slower regexp (POSIX regular expressions) support is more widely avail-able. available.
able. Use the command "postconf -m" to find out what lookup table types your Postfix system sup-ports. supports.
ports.
The general format of Postfix regular expression tables is given below. For a discussion of specific
pattern or flags syntax, see pcre_table(5) or regexp_table(5), respectively.
/pattern/flags action
When pattern matches the input string, execute the corresponding action. See below for a list
of possible actions.
!/pattern/flags action
When pattern does not match the input string, execute the corresponding action.
if /pattern/flags
endif Match the input string against the patterns between if and endif, if and only if the same
input string also matches pattern. The if..endif can nest.
Note: do not prepend whitespace to patterns inside if..endif.
if !/pattern/flags
endif Match the input string against the patterns between if and endif, if and only if the same
input string does not match pattern. The if..endif can nest.
blank lines and comments
Empty lines and whitespace-only lines are ignored, as are lines whose first non-whitespace
character is a `#'.
multi-line text
A pattern/action line starts with non-whitespace text. A line that starts with whitespace con-tinues continues
tinues a logical line.
TABLE SEARCH ORDER
For each line of message input, the patterns are applied in the order as specified in the table. When
a pattern is found that matches the input line, the corresponding action is executed and then the
next input line is inspected.
TEXT SUBSTITUTION
Substitution of substrings from the matched expression into the action string is possible using the
conventional Perl syntax ($1, $2, etc.). The macros in the result string may need to be written as
${n} or $(n) if they aren't followed by whitespace.
Note: since negated patterns (those preceded by !) return a result when the expression does not
match, substitutions are not available for negated patterns.
ACTIONS
Action names are case insensitive. They are shown in upper case for consistency with other Postfix
documentation.
DISCARD optional text...
Claim successful delivery and silently discard the message. Log the optional text if speci-fied, specified,
fied, otherwise log a generic message.
Note: this action disables further header or body_checks inspection of the current message and
affects all recipients. To discard only one recipient without discarding the entire message,
use the transport(5) table to direct mail to the discard(8) service.
This feature is available in Postfix 2.0 and later.
DUNNO Pretend that the input line did not match any pattern, and inspect the next input line. This
action can be used to shorten the table search.
For backwards compatibility reasons, Postfix also accepts OK but it is (and always has been)
treated as DUNNO.
This feature is available in Postfix 2.1 and later.
FILTER transport:destination
Write a content filter request to the queue file, and inspect the next input line. After the
complete message is received it will be sent through the specified external content filter.
More information about external content filters is in the Postfix FILTER_README file.
Note: this action overrides the content_filter setting, and affects all recipients of the mes-sage. message.
sage. In the case that multiple FILTER actions fire, only the last one is executed.
This feature is available in Postfix 2.0 and later.
HOLD optional text...
Arrange for the message to be placed on the hold queue, and inspect the next input line. The
message remains on hold until someone either deletes it or releases it for delivery. Log the
optional text if specified, otherwise log a generic message.
Mail that is placed on hold can be examined with the postcat(1) command, and can be destroyed
or released with the postsuper(1) command.
Note: use "postsuper -r" to release mail that was kept on hold for a significant fraction of
$maximal_queue_lifetime or $bounce_queue_lifetime, or longer. Use "postsuper -H" only for mail
that will not expire within a few delivery attempts.
Note: this action affects all recipients of the message.
This feature is available in Postfix 2.0 and later.
IGNORE Delete the current line from the input, and inspect the next input line.
PREPEND text...
Prepend one line with the specified text, and inspect the next input line.
Notes:
The prepended text is output on a separate line, immediately before the input that
triggered the PREPEND action.
The prepended text is not considered part of the input stream: it is not subject to
header/body checks or address rewriting, and it does not affect the way that Postfix
adds missing message headers.
When prepending text before a message header line, the prepended text must begin with a
valid message header label.
This action cannot be used to prepend multi-line text.
This feature is available in Postfix 2.1 and later.
REDIRECT user@domain
Write a message redirection request to the queue file, and inspect the next input line. After
the message is queued, it will be sent to the specified address instead of the intended recip-ient(s). recipient(s).
ient(s).
Note: this action overrides the FILTER action, and affects all recipients of the message. If
multiple REDIRECT actions fire, only the last one is executed.
This feature is available in Postfix 2.1 and later.
REPLACE text...
Replace the current line with the specified text, and inspect the next input line.
This feature is available in Postfix 2.2 and later. The description below applies to Postfix
2.2.2 and later.
Notes:
When replacing a message header line, the replacement text must begin with a valid
header label.
The replaced text remains part of the input stream. Unlike the result from the PREPEND
action, a replaced message header may be subject to address rewriting and may affect
the way that Postfix adds missing message headers.
REJECT optional text...
Reject the entire message. Reply with optional text... when the optional text is specified,
otherwise reply with a generic error message.
Note: this action disables further header or body_checks inspection of the current message and
affects all recipients.
Postfix version 2.3 and later support enhanced status codes. When no code is specified at the
beginning of optional text..., Postfix inserts a default enhanced status code of "5.7.1".
WARN optional text...
Log a warning with the optional text... (or log a generic message), and inspect the next input
line. This action is useful for debugging and for testing a pattern before applying more dras-tic drastic
tic actions.
BUGS
Many people overlook the main limitations of header and body_checks rules.
These rules operate on one logical message header or one body line at a time. A decision made
for one line is not carried over to the next line.
If text in the message body is encoded (RFC 2045) then the rules need to be specified for the
encoded form.
Likewise, when message headers are encoded (RFC 2047) then the rules need to be specified for
the encoded form.
Message headers added by the cleanup(8) daemon itself are excluded from inspection. Examples of such
message headers are From:, To:, Message-ID:, Date:.
Message headers deleted by the cleanup(8) daemon will be examined before they are deleted. Examples
are: Bcc:, Content-Length:, Return-Path:.
CONFIGURATION PARAMETERS
body_checks
Lookup tables with content filter rules for message body lines. These filters see one physi-cal physical
cal line at a time, in chunks of at most $line_length_limit bytes.
body_checks_size_limit
The amount of content per message body segment (attachment) that is subjected to $body_checks
filtering.
header_checks
mime_header_checks (default: $header_checks)
nested_header_checks (default: $header_checks)
Lookup tables with content filter rules for message header lines: respectively, these are
applied to the initial message headers (not including MIME headers), to the MIME headers any-where anywhere
where in the message, and to the initial headers of attached messages.
Note: these filters see one logical message header at a time, even when a message header spans
multiple lines. Message headers that are longer than $header_size_limit characters are trun-cated. truncated.
cated.
disable_mime_input_processing
While receiving mail, give no special treatment to MIME related message headers; all text
after the initial message headers is considered to be part of the message body. This means
that header_checks is applied to all the initial message headers, and that body_checks is
applied to the remainder of the message.
Note: when used in this manner, body_checks will process a multi-line message header one line
at a time.
EXAMPLES
Header pattern to block attachments with bad file name extensions.
/etc/postfix/main.cf:
header_checks = regexp:/etc/postfix/header_checks
/etc/postfix/header_checks:
/^content-(type|disposition):.*name[[:space:]]*=.*\.(exe|vbs)/
REJECT Bad attachment file name extension: $2
Body pattern to stop a specific HTML browser vulnerability exploit.
/etc/postfix/main.cf:
body_checks = regexp:/etc/postfix/body_checks
/etc/postfix/body_checks:
/^<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>$/
REJECT IFRAME vulnerability exploit
SEE ALSO
cleanup(8), canonicalize and enqueue Postfix message
pcre_table(5), format of PCRE lookup tables
regexp_table(5), format of POSIX regular expression tables
postconf(1), Postfix configuration utility
postmap(1), Postfix lookup table management
postsuper(1), Postfix janitor
postcat(1), show Postfix queue file contents
RFC 2045, base64 and quoted-printable encoding rules
RFC 2047, message header encoding for non-ASCII text
README FILES
Use "postconf readme_directory" or "postconf html_directory" to locate this information.
DATABASE_README, Postfix lookup table overview
CONTENT_INSPECTION_README, Postfix content inspection overview
BUILTIN_FILTER_README, Postfix built-in content inspection
BACKSCATTER_README, blocking returned forged mail
LICENSE
The Secure Mailer license must be distributed with this software.
AUTHOR(S)
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
HEADER_CHECKS(5)
|