Legacy Documentclose button

Important: This document is part of the Legacy section of the ADC Reference Library. This information should not be used for new development.

Current information on this Reference Library topic can be found here:

Version: 1.0

Posted: 2003-07-22

Build Requirements: N/A

Runtime Requirements: Carbon See the readme file

View Source Code:

Download Sample (“OTLLCTest.zip”, 56.8K)
Download Sample (“OTLLCTest.dmg”, 120.9K)


Sample program demonstrating how to read and write data packets directly to an ethernet driver using the Open Transport XTI API. The sample program implements both send and receive. Demonstrates the following. 1. How to determine which port AppleTalk is currently using 2. List available ethernet drivers 3. Using Option Management to enable raw mode for both original and mentat template based drivers. Development - Requires CodeWarrior IDE v2.1 or greater along with OT 1.1.2 or greater. For testing with ethernet hardware not using the mentat template, requires a minimum of SSW 7.5.3 and OT 1.1.1. If an ethernet driver that has a driver based on the mentat template, then SSW 8.0 with OT 1.2 is required. Requirements: See the readme file Keywords: Ethernet, raw mode, DLPI, enet, multicast, MDATA, LLC, 802.2, 802.3, OTLLCTest

Document Revision History

Date Notes
2003-07-22First Version

Did this document help you?
Yes: Tell us what works for you.
It’s good, but: Report typos, inaccuracies, and so forth.
It wasn’t helpful: Tell us what would have helped.