ld(1) BSD General Commands Manual ld(1)
NAME
ld -- linker
SYNOPSIS
ld files... [options] [-o outputfile]
DESCRIPTION
The ld command combines several object files and libraries, resolves references, and produces an ouput
file. ld can produce a final linked image (executable, dylib, or bundle), or with the -r option, pro-duce produce
duce another object file. If the -o option is not used, the output file produced is named "a.out".
Universal
The linker accepts universal (multiple-architecture) input files, but always creates a "thin" (single-architecture), (singlearchitecture),
architecture), standard Mach-O output file. The architecture for the output file is specified using
the -arch option. If this option is not used, ld attempts to determine the output architecture by
examining the object files in command line order. The first "thin" architecture determines that of the
output file. If no input object file is a "thin" file, the native 32-bit architecture for the host is
used.
Usually, ld is not used directly. Instead the gcc(1) compiler driver invokes ld. The compiler driver
can be passed multiple -arch options and it will create a universal final linked image by invoking ld
multiple times and then running lipo(1) merge the outputs into a universal file.
Layout
The object files are loaded in the order in which they are specified on the command line. The segments
and the sections in those segments will appear in the output file in the order they are encountered in
the object files being linked. All zero fill sections will appear after all non-zero fill sections in
their segments. Sections created from files with the -sectcreate option will be laid out at after sec-tions sections
tions from .o files. The use of the -order_file option will alter the layout rules above, and move the
symbols specified to start of their section.
Libraries
A static library (aka static archive) is a collection of .o files with a table of contents that lists
the global symbols in the .o files. ld will only pull .o files out of a static library if needed to
resolve some symbol reference. Unlike traditional linkers, ld will continually search a static library
while linking. There is no need to specify a static library multiple times on the command line.
A dynamic library (aka dylib or framework) is a final linked image. Putting a dynamic library on the
command line causes two things: 1) The generated final linked image will have encoded that it depends
on that dynamic library. 2) Exported symbols from the dynamic library are used to resolve references.
Both dynamic and static libraries are searched as they appear on the command line.
Search paths
ld maintains a list of directories to search for a library or framework to use. The default library
search path is /usr/lib then /usr/local/lib. The -L option will add a new library search path. The
default framework search path is /Library/Frameworks then /System/Library/Frameworks. The -F option
will a new framework search path. The -Z option will remove the standard search paths. The -syslib-root -syslibroot
root option will prepend a prefix to all search paths.
Two-level namespace
By default all references resolved to a dynamic library record the library to which they were resolved.
At runtime, dyld uses that information to directly resolve symobls. The alternative is to use the
-flat_namespace option. With flat namespace, the library is not recorded. At runtime, dyld will
search each dynamic library in load order when resolving symbols. This is slower, but more like how
other operating systems resolve symbols.
Indirect dynamic libraries
If the command line specifies to link against dylib A, and when dylib A was built it linked against
dylib B, then B is considered an indirect dylib. When linking for two-level namespace, ld does not
look at indirect dylibs, except when re-exported by a direct dylibs. On the other hand when linking
for flat namespace, ld does load all indirect dylibs and uses them to resolve references. Even though
indirect dylibs are specified via a full path, ld first uses the specified search paths to locate each
indirect dylib. If one cannot be found using the search paths, the full path is used.
Dynamic libraries undefines
When linking for two-level namespace, ld does not verify that undefines in dylibs actually exist. But
when linking for flat namespace, ld does check that all undefines from all loaded dylibs have a match-ing matching
ing definition. This is sometimes used to force selected functions to be loaded from a static library.
OPTIONS
Options that control the kind of output
-execute The default. Produce a mach-o main executable that has file type MH_EXECUTE.
-dylib Produce a mach-o shared library that has file type MH_DYLIB.
-bundle Produce a mach-o bundle that has file type MH_BUNDLE.
-r Merges object files to produce another mach-o object file with file type MH_OBJECT.
-dylinker Produce a mach-o dylinker that has file type MH_DYLINKER. Only used when building dyld.
-dynamic The default. Implied by -dynamiclib, -bundle, or -execute
-static Produces a mach-o file that does not use the dyld. Only used building the kernel.
-arch arch_name
Specifies which architecture (e.g. ppc, ppc64, i386, x86_64) the output file should be.
-o path Specifies the name and location of the output file. If not specified, `a.out' is used.
Options that control libraries
-lx This option tells the linker to search for libx.dylib or libx.a in the library search path.
If string x is of the form y.o, then that file is searched for in the same places, but
without prepending `lib' or appending `.a' or `.dylib' to the filename.
-weak-lx This is the same as the -lx but forces the library and all references to it to be marked as
weak imports. That is, the library is allowed to be missing at runtime.
-weak_library path_to_library
This is the same as listing a file name path to a library on the link line except that it
forces the library and all references to it to be marked as weak imports.
-reexport-lx
This is the same as the -lx but specifies that the all symbols in library x should be
available to clients linking to the library being created. This was previously done with a
separate -sub_library option.
-reexport_library path_to_library
This is the same as listing a file name path to a library on the link line and it specifies
that the all symbols in library path should be available to clients linking to the library
being created. This was previously done with a separate -sub_library option.
-Ldir Add dir to the list of directories in which to search for libraries. Directories specified
with -L are searched in the order they appear on the command line and before the default
search path.
-Z Do not search the standard directories when searching for libraries and frameworks.
-syslibroot rootdir
Prepend rootdir to all search paths when searching for libraries or frameworks.
-search_paths_first
By default the -lx and -weak-lx options first search for a file of the form `libx.dylib' in
each directory in the library search path, then a file of the form `libx.a' is searched for
in the library search paths. This option changes it so that in each path `libx.dylib' is
searched for then `libx.a' before the next path in the library search path is searched.
-framework name[,suffix]
This option tells the linker to search for `name.framework/name' the framework search path.
If the optional suffix is specified the framework is first searched for the name with the
suffix and then without (e.g. look for `name.framework/name_suffix' first).
-weak_framework name[,suffix]
This is the same as the -framework name[,suffix] but forces the framework and all refer-ences references
ences to it to be marked as weak imports.
-reexport_framework name[,suffix]
This is the same as the -framework name[,suffix] but also specifies that the all symbols in
that framework should be available to clients linking to the library being created. This
was previously done with a separate -sub_umbrella option.
-Fdir Add dir to the list of directories in which to search for frameworks. Directories speci-fied specified
fied with -F are searched in the order they appear on the command line and before the
default search path.
-all_load Loads all members of static archive libraries.
-ObjC Loads all members of static archive libraries that implement an Objective-C class or cate-gory. category.
gory.
Options that control additional content
-sectcreate segname sectname file
The section sectname in the segment segname is created from the contents of file file. The
combination of segname and sectname must be unique there cannot already be a section
(segname,sectname) from any other input.
-filelist file[,dirname]
Specifies that the linker should link the files listed in file. This is an alternative to
listing the files on the command line. The file names are listed one per line separated
only by newlines. (Spaces and tabs are assumed to be part of the file name.) If the
optional directory name, dirname is specified, it is prepended to each name in the list
file.
-dtrace file
Enables dtrace static probes when producing a final linked image. The file file must be a
DTrace script which declares the static probes.
Options that control optimizations
-dead_strip
Remove functions and data that are unreachable by the entry point or exported symbols.
-dead_strip_dylibs
Remove dylibs that are unreachable by the entry point or exported symbols. That is, sup-presses suppresses
presses the generation of load command commands for dylibs which supplied no symbols during
the link. This option should not be used when linking against a dylib which is required at
runtime for some indirect reason such as the dylib has an important initializer.
-order_file file
Alters the order in which functions and data are laid out. For each section in the output
file, any symbol in that section that are specified in the order file file is moved to the
start of its section and laid out in the same order as in the order file file. Order files
are text files with one symbol name per line. Lines starting with a # are comments. A
symbol name may be optionally preceded with its object file leafname and a colon (e.g.
foo.o:_foo). This is useful for static functions/data that occur in multiple files. A
symbol name may also be optionally preceded with the architecture (e.g. ppc:_foo or
ppc:foo.o:_foo). This enables you to have one order file that works for multiple architec-tures. architectures.
tures. Literal c-strings may be ordered by by quoting the string (e.g. "Hello, world\n")
in the order file.
-macosx_version_min version
This is set to indicate the oldest Mac OS X version that that the output is to be used on.
Specifying a later version enables the linker to assumes features of that OS in the output
file. The format of version is a Mac OS X version number such as 10.4 or 10.5
-image_base address
Specifies the perferred load address for a dylib or bundle. The argument address is a hexa-decimal hexadecimal
decimal number with an optional leading 0x. By choosing non-overlapping address for all
dylibs and bundles that a program loads, launch time can be improved because dyld will not
need to "rebase" the image (that is, adjust pointers within the image to work at the loaded
address). It is often easier to not use this option, but instead use the rebase(1) tool,
and give it a list of dylibs. It will then choose non-overlapping addresses for the list
and rebase them all. This option is also called -seg1addr for compatibility.
Options when creating a dynamic library (dylib)
-install_name name
Sets an internal "install path" (LC_ID_DYLIB) in a dynamic library. Any clients linked
against the library will record that path as the way dyld should locate this library. If
this option is not specified, then the -o path will be used. This option is also called
-dylib_install_name for compatibility.
-compatibility_version number
Specifies the compatibility version number of the library. When a library is loaded by
dyld, the compatibility version is checked and if the program's version is greater that the
library's version, it is an error. The format of number is X[.Y[.Z]] where X must be a
positive non-zero number less than or equal to 65535, and .Y and .Z are optional and if
present must be non-negative numbers less than or equal to 255. If the compatibility ver-sion version
sion number is not specified, it has a value of 0 and no checking is done when the library
is used. This option is also called -dylib_compatibility_version for compatibility.
-current_version number
Specifies the current version number of the library. The current version of the library can
be obtained programmatically by the user of the library so it can determine exactly which
version of the library it is using. The format of number is X[.Y[.Z]] where X must be a
positive non-zero number less than or equal to 65535, and .Y and .Z are optional and if
present must be non-negative numbers less than or equal to 255. If the version number is
not specified, it has a value of 0. This option is also called -dylib_current_version for
compatibility.
Options when creating a main executable
-pie This makes a special kind of main executable that is position independent (PIE). On Mac OS
X 10.5, the OS will load a PIE at a random address each time it is executed. You cannot
create a PIE from .o files compiled with -mdynamic-no-pic. That means the codegen is less
optimal, but the address randomization adds some security.
-pagezero_size size
By default the linker creates an unreadable segment starting at address zero named
__PAGEZERO. Its existence will cause a bus error if a NULL pointer is dereferenced. The
argument size is a hexadecimal number with an optional leading 0x. If size is zero, the
linker will not generate a page zero segment. By default on 32-bit architectures the page
zero size is 4KB. On 64-bit architectures, the default size if 4GB. The ppc64 architec-ture architecture
ture has some special cases. Since Mac OS X 10.4 did not support 4GB page zero programs,
the default page zero size for ppc64 will be 4KB unless -macosx_version_min is 10.5 or
later. Also, the -mdynamic-no-pic codegen model for ppc64 will only work if the code is
placed in the lower 2GB of the address space, so the if the linker detects any such code,
the page zero size is set to 4KB and then a new unredable trailing segment is created after
the code, filling up the lower 4GB.
-stack_size size
Specifies the maximum stack size for the main thread in a program. Without this option a
program has a 8MB stack. The argument size is a hexadecimal number with an optional lead-ing leading
ing 0x. The size should be an even multiple of 4KB, that is the last three hexadecimal dig-its digits
its should be zero.
-allow_stack_execute
Marks executable so that all stacks in the task will be given stack execution privilege.
This includes pthread stacks.
Options when creating a bundle
-bundle_loader executable
This specifies the executable that will be loading the bundle output file being linked.
Undefined symbols from the bundle are checked against the specified executable like it was
one of the dynamic libraries the bundle was linked with.
Options when creating an object file
-keep_private_externs
Don't turn private external (aka visibility=hidden) symbols into static symbols, but rather
leave them as private external in the resulting object file.
-d Force definition of common symbols. That is, transform tentative defintions into real def-initions. definitions.
initions.
Options that control symbol resolution
-exported_symbols_list filename
The specified filename contains a list of global symbol names that will remain as global
symbols in the output file. All other global symbols will be treated as if they were
marked as __private_extern__ (aka visibility=hidden) and will not be global in the output
file. The symbol names listed in filename must be one per line. Leading and trailing white
space are not part of the symbol name. Lines starting with # are ignored, as are lines
with only white space. Some wildcards (similar to shell file matching) are supported. The
* matches zero or more characters. The ? matches one character. [abc] matches one charac-ter character
ter which must be an 'a', 'b', or 'c'. [a-z] matches any single lower case letter from 'a'
to 'z'.
-exported_symbol symbol
The specified symbol is added to the list of global symbols names that will remain as
global symbols in the output file. This option can be used multiple times. For short
lists, this can be more convenient than creating a file and using -exported_symbols_list.
-unexported_symbols_list file
The specified filename contains a list of global symbol names that will not remain as
global symbols in the output file. The symbols will be treated as if they were marked as
__private_extern__ (aka visibility=hidden) and will not be global in the output file. The
symbol names listed in filename must be one per line. Leading and trailing white space are
not part of the symbol name. Lines starting with # are ignored, as are lines with only
white space. Some wildcards (similar to shell file matching) are supported. The * matches
zero or more characters. The ? matches one character. [abc] matches one character which
must be an 'a', 'b', or 'c'. [a-z] matches any single lower case letter from 'a' to 'z'.
-unexported_symbol symbol
The specified symbol is added to the list of global symbols names that will not remain as
global symbols in the output file. This option can be used multiple times. For short
lists, this can be more convenient than creating a file and using -unexported_symbols_list.
-alias symbol_name alternate_symbol_name
Create an alias named alternate_symbol_name for the symbol symbol_name. By default the
alias symbol has global visibility. This option was previous the -idef:indir option.
-alias_list filename
The specified filename contains a list of aliases. The symbol name and its alias are on one
line, separated by whitespace. Lines starting with # are ignored.
-flat_namespace
Alters how symbols are resolved at build time and runtime. With -two_levelnamespace (the
default), the linker only searches dylibs on the command line for symbols, and records in
which dylib they were found. With -flat_namespace, the linker searches all dylibs on the
command line and all dylibs those original dylibs depend on. The linker does not record
which dylib an external symbol came from, so at runtime dyld again searches all images and
uses the first definition it finds. In addition, any undefines in loaded flat_namespace
dylibs must be resolvable at build time.
-u symbol_name
Specified that symbol symbol_name must be defined for the link to succeed. This is useful
to force selected functions to be loaded from a static library.
-U symbol_name
Specified that it is ok for symbol_name to have no definition. With -two_levelnamespace,
the resulting symbol will be marked dynamic_lookup which means dyld will search all loaded
images.
-undefined treatment
Specifies how undefined symbols are to be treated. Options are: error, warning, suppress,
or dynamic_lookup. The default is error.
-rpath path
Add path to the runpath search path list for image being created. At runtime, dyld uses
the runpath when searching for dylibs whose load path begins with @rpath/.
Options for introspecting the linker
-why_load Log why each object file in a static library is loaded. That is, what symbol was needed.
Also called -whyload for compatibility.
-why_live symbol_name
Logs a chain of references to symbol_name. Only applicable with -dead_strip . It can help
debug why something that you think should be dead strip removed is not removed.
-print_statistics
Logs information about the amount of memory and time the linker used.
-t Logs each file (object, archive, or dylib) the linker loads. Useful for debugging problems
with search paths where the wrong library is loaded.
-whatsloaded
Logs just object files the linker loads.
-order_file_statistics
Logs information about the processing of a -order_file.
-map map_file_path
Writes a map file to the specified path which details all symbols and their addresses in
the output image.
Options for controling symbol table optimizations
-S Do not put debug information (STABS or DWARF) in the output file.
-x Do not put non-global symbols in the output file's symbol table. Non-global symbols are
useful when debugging and getting symbol names in back traces, but are not used at runtime.
-non_global_symbols_strip_list filename
The specified filename contains a list of non-global symbol names that should be removed
from the output file's symbol table. All other non-global symbol names will remain in the
output files symbol table. See -exported_symbols_list for syntax and use of wildcards.
-non_global_symbols_no_strip_list filename
The specified filename contains a list of non-global symbol names that should be remain in
the output file's symbol table. All other symbol names will be removed from the output
file's symbol table. See -exported_symbols_list for syntax and use of wildcards.
Rarely used Options
-v Prints the version of the linker.
-no_uuid Do not generate an LC_UUID load command in the output file.
-root_safe Sets the MH_ROOT_SAFE bit in the mach header of the output file.
-setuid_safe
Sets the MH_SETUID_SAFE bit in the mach header of the output file.
-interposable
Indirects access to all to exported symbols when creating a dynamic library.
-init symbol_name
The specified symbol_name will be run as the first initializer. Only used when creating a
dynamic library.
-sub_library library_name
The specified dylib will be re-exported. For example the library_name for
/usr/lib/libobjc_profile.A.dylib would be libobjc. Only used when creating a dynamic
library.
-sub_umbrella framework_name
The specified framework will be re-exported. Only used when creating a dynamic library.
-allowable_client name
Restricts what can link against the dynamic library being created.
-client_name name
Enables a bundle to link against a dylib that was built with -allowable_client. The name
specified must match one of the -allowable_client names specified when the dylib was cre-ated. created.
ated.
-umbrella framework_name
Specifies that the dylib being linked is re-exported through an umbrella framework of the
specified name.
-headerpad size
Specifies the minimum space for future expansion of the load commands. Only useful if
intend to run install_name_tool to alter the load commands later. Size is a hexadecimal
number.
-headerpad_max_install_names
Automatically adds space for future expansion of load commands such that all paths could
expand to MAXPATHLEN. Only useful if intend to run install_name_tool to alter the load
commands later. Size is a hexadecimal number.
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols
when the binary is loaded, rather than lazily.
-force_flat_namespace
Sets a bit in the mach header of the resulting binary which tells dyld to not only use flat
namespace for the binary, but force flat namespace binding on all dylibs and bundles loaded
in the process. Can only be used when linking main executables.
-sectalign segname sectname value
The section named sectname in the segment segname will have its alignment set to value,
where value is a hexadecimal number that must be an integral power of 2.
-stack_addr address
Specifies the initial address of the stack pointer value, where value is a hexadecimal num-ber number
ber rounded to a page boundary.
-segprot segname max_prot init_prot
Specifies the maximum and initial virtual memory protection of the named segment, name, to
be max and init ,respectively. The values for max and init are any combination of the
characters `r' (for read), `w' (for write), `x' (for execute) and `-' (no access).
-seg_addr_table filename
Specifies a file containing base addresses for dynamic libraries. Each line of the file is
a hexadecimal base address followed by whitespace then the install name of the correspond-ing corresponding
ing dylib. The # character denotes a comment.
-segs_read_write_addr address
Allows a dynamic library to be built where the read-only and read-write segments are not
contiguous. The address specified is a hexadecimal number that indicates the base address
for the read-write segments.
-segs_read_only_addr address
Allows a dynamic library to be built where the read-only and read-write segments are not
contiguous. The address specified is a hexadecimal number that indicates the base address
for the read-only segments.
-segaddr name address
Specifies the starting address of the segment named name to be address. The address must be
a hexadecimal number that is a multiple of 4K page size.
-dylib_file install_name:file_name
Specifies that a dynamic shared library is in a different location than its standard loca-tion. location.
tion. Use this option when you link with a library that is dependent on a dynamic library,
and the dynamic library is in a location other than its default location. install_name
specifies the path where the library normally resides. file_name specifies the path of the
library you want to use instead. For example, if you link to a library that depends upon
the dynamic library libsys and you have libsys installed in a nondefault location, you
would use this option: -dylib_file /lib/libsys_s.A.dylib:/me/lib/libsys_s.A.dylib.
-prebind The created output file will be in the prebound format. This was used in Mac OS X 10.3 and
earlier to improve launch performance.
-weak_reference_mismatches treatment
Specifies what to do if a symbol is weak-imported in one object file but not weak-imported
in another. The valid treatments are: error, weak, or non-weak. The default is non-weak.
-read_only_relocs treatment
Enables the use of relocations which will cause dyld to modify (copy-on-write) read-only
pages. The compiler will normally never generate such code.
-force_cpusubtype_ALL
The is only applicable with -arch ppc. It tells the linker to ignore the PowerPC cpu
requirements (e.g. G3, G4 or G5) encoded in the object files and mark the resulting binary
as runnable on any PowerPC cpu.
-dylinker_install_name path
Only used when building dyld.
-no_arch_warnings
Suppresses warning messages about files that have the wrong architecture for the -arch flag
-arch_errors_fatal
Turns into errors, warnings about files that have the wrong architecture for the -arch
flag.
-e symbol_name
Specifies the entry point of a main executable. By default the entry name is "start" which
is found in crt1.o which contains the glue code need to set up and call main().
-w Suppress all warning messages
-final_output name
Specifies the install name of a dylib if -install_name is not used. This option is used by
gcc driver when it is invoked with multiple -arch arguments.
-arch_multiple
Specifes that the linker should augment error and warning messages with the architecture
name. This option is used by gcc driver when it is invoked with multiple -arch arguments.
-twolevel_namespace_hints
Specifies that hints should be added to the resulting binary that can help speed up runtime
binding by dyld as long as the libraries being linked against have not changed.
-dot path Create a file a file at the specified path containing a graph of symbol dependencies. The
.dot file can be viewed in GraphViz.
-keep_relocs
Add section based relocation records to a final linked image. These relocations are
ignored at runtime by dyld.
-warn_stabs
Print a warning when the linker cannot do a BINCL/EINCL optimzation because the compiler
put a bad stab symbol inside a BINCL/EINCL range.
Obsolete Options
-segalign value
All segments must be page aligned. This option is obsolete.
-seglinkedit
Object files (MH_OBJECT) with a LINKEDIT segment are no longer supported. This option is
obsolete.
-noseglinkedit
This is the default. This option is obsolete.
-fvmlib Fixed VM shared libraries (MH_FVMLIB) are no longer supported. This option is obsolete.
-preload Preload executables (MH_PRELOAD) are no longer supported. This option is obsolete.
-sectobjectsymbols segname sectname
Adding a local label at a section start is no longer supported. This option is obsolete.
-nofixprebinding
The MH_NOFIXPREBINDING bit of mach_headers has been ignored since Mac OS X 10.3.9. This
option is obsolete.
-noprebind_all_twolevel_modules
Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0.
This option is obsolete.
-prebind_all_twolevel_modules
Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0.
This option is obsolete.
-prebind_allow_overlap
When using -prebind, the linker allows overlapping by default, so this option is obsolete.
-noprebind LD_PREBIND is no longer supported as a way to force on prebinding, so there no longer needs
to be a command line way to override LD_PREBIND. This option is obsolete.
-sect_diff_relocs treatment
This option was an attempt to warn about linking .o files compiled without -mdynamic-no-pic
into a main executable, but the false positive rate generated too much noise to make the
option useful. This option is obsolete.
-run_init_lazily
This option was removed in Mac OS X 10.2.
-single_module
This is now the default so does not need to be specified.
-multi_module
Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0.
This option is obsolete.
-no_dead_strip_inits_and_terms
The linker never dead strips initialzation and termination routines. They are considered
"roots" of the dead strip graph.
-A basefile
Obsolete incremental load format. This option is obsolete.
-b Used with -A option to strip base file's symbols. This option is obsolete. Obsolete
option to produce a load map. Use -map option instead.
-Sn Don't strip any symbols. This is the default. This option is obsolete.
-Si Optimize stabs debug symbols to remove duplicates. This is the default. This option is
obsolete.
-Sp Write minimal stabs which causes the debugger to open and read the original .o file for
full stabs. This style of debugging is obsolete in Mac OS X 10.5. This option is obso-lete. obsolete.
lete.
-X Strip local symbols that being the 'L'. This is the default. This option is obsolete.
-s Completely strip the output, including removing the symbol table. This file format variant
is no longer supported. This option is obsolete.
-m Don't treat multiple definitions as an error. This is no longer supported. This option is
obsolete.
-ysymbol Display each file in which symbol is used. This was previously used to debug where an
undefined symbol was used, but the linker now automatically prints out all usages. The
-why_live option can also be used to display what kept a symbol from being dead striped.
This option is obsolete.
-Y number Used to control how many occurances of each symbol specifed with -y would be shown. This
option is obsolete.
-nomultidefs
Only used when linking an umbrella framework. Sets the MH_NOMULTIDEFS bit in the
mach_header. The MH_NOMULTIDEFS bit has been obsolete since Mac OS X 10.4. This option is
obsolete.
-multiply_defined_unused treatment
Previously provided a way to warn or error if any of the symbol definitions in the output
file matched any definitions in dynamic library being linked. This option is obsolete.
-multiply_defined treatment
Previously provided a way to warn or error if any of the symbols used from a dynamic
library were also available in another linked dynamic library. This option is obsolete.
-private_bundle
Previously prevented errors when -flat_namespace, -bundle, and -bundle_loader were used and
the bundle contained a definition that conflicted with a symbol in the main executable.
The linker no longer errors on such conflicts. This option is obsolete.
-noall_load
This is the default. This option is obsolete.
-seg_addr_table_filename path
Use path instead of the install name of the library for matching an entry in the
seg_addr_table. This option is obsolete.
-sectorder segname sectname orderfile
Replaced by more general -order_file option.
-sectorder_detail
Produced extra logging about which entries from a sectorder entries were used. Replaced by
-order_file_statistics. This option is obsolete.
SEE ALSO
as(1), ar(1), cc(1), nm(1), otool(1) lipo(1), arch(3), dyld(3), Mach-O(5), strip(1), rebase(1)
Darwin December 8, 2006 Darwin
|