PERLFORK(1) Perl Programmers Reference Guide PERLFORK(1)
NAME
perlfork - Perl's fork() emulation
SYNOPSIS
NOTE: As of the 5.8.0 release, fork() emulation has considerably
matured. However, there are still a few known bugs and differences
from real fork() that might affect you. See the "BUGS" and
"CAVEATS AND LIMITATIONS" sections below.
Perl provides a fork() keyword that corresponds to the Unix system call of the same name. On most
Unix-like platforms where the fork() system call is available, Perl's fork() simply calls it.
On some platforms such as Windows where the fork() system call is not available, Perl can be built to
emulate fork() at the interpreter level. While the emulation is designed to be as compatible as pos-sible possible
sible with the real fork() at the level of the Perl program, there are certain important differences
that stem from the fact that all the pseudo child "processes" created this way live in the same real
process as far as the operating system is concerned.
This document provides a general overview of the capabilities and limitations of the fork() emula-tion. emulation.
tion. Note that the issues discussed here are not applicable to platforms where a real fork() is
available and Perl has been configured to use it.
DESCRIPTION
The fork() emulation is implemented at the level of the Perl interpreter. What this means in general
is that running fork() will actually clone the running interpreter and all its state, and run the
cloned interpreter in a separate thread, beginning execution in the new thread just after the point
where the fork() was called in the parent. We will refer to the thread that implements this child
"process" as the pseudo-process.
To the Perl program that called fork(), all this is designed to be transparent. The parent returns
from the fork() with a pseudo-process ID that can be subsequently used in any process manipulation
functions; the child returns from the fork() with a value of 0 to signify that it is the child
pseudo-process.
Behavior of other Perl features in forked pseudo-processes
Most Perl features behave in a natural way within pseudo-processes.
$$ or $PROCESS_ID
This special variable is correctly set to the pseudo-process ID. It can be used to identify
pseudo-processes within a particular session. Note that this value is subject to recycling
if any pseudo-processes are launched after others have been wait()-ed on.
%ENV Each pseudo-process maintains its own virtual environment. Modifications to %ENV affect the
virtual environment, and are only visible within that pseudo-process, and in any processes
(or pseudo-processes) launched from it.
chdir() and all other builtins that accept filenames
Each pseudo-process maintains its own virtual idea of the current directory. Modifications
to the current directory using chdir() are only visible within that pseudo-process, and in
any processes (or pseudo-processes) launched from it. All file and directory accesses from
the pseudo-process will correctly map the virtual working directory to the real working
directory appropriately.
wait() and waitpid()
wait() and waitpid() can be passed a pseudo-process ID returned by fork(). These calls will
properly wait for the termination of the pseudo-process and return its status.
kill() kill() can be used to terminate a pseudo-process by passing it the ID returned by fork().
This should not be used except under dire circumstances, because the operating system may not
guarantee integrity of the process resources when a running thread is terminated. Note that
using kill() on a pseudo-process() may typically cause memory leaks, because the thread that
implements the pseudo-process does not get a chance to clean up its resources.
exec() Calling exec() within a pseudo-process actually spawns the requested executable in a separate
process and waits for it to complete before exiting with the same exit status as that
process. This means that the process ID reported within the running executable will be dif-ferent different
ferent from what the earlier Perl fork() might have returned. Similarly, any process manipu-lation manipulation
lation functions applied to the ID returned by fork() will affect the waiting pseudo-process
that called exec(), not the real process it is waiting for after the exec().
exit() exit() always exits just the executing pseudo-process, after automatically wait()-ing for any
outstanding child pseudo-processes. Note that this means that the process as a whole will
not exit unless all running pseudo-processes have exited.
Open handles to files, directories and network sockets
All open handles are dup()-ed in pseudo-processes, so that closing any handles in one process
does not affect the others. See below for some limitations.
Resource limits
In the eyes of the operating system, pseudo-processes created via the fork() emulation are simply
threads in the same process. This means that any process-level limits imposed by the operating sys-tem system
tem apply to all pseudo-processes taken together. This includes any limits imposed by the operating
system on the number of open file, directory and socket handles, limits on disk space usage, limits
on memory size, limits on CPU utilization etc.
Killing the parent process
If the parent process is killed (either using Perl's kill() builtin, or using some external means)
all the pseudo-processes are killed as well, and the whole process exits.
Lifetime of the parent process and pseudo-processes
During the normal course of events, the parent process and every pseudo-process started by it will
wait for their respective pseudo-children to complete before they exit. This means that the parent
and every pseudo-child created by it that is also a pseudo-parent will only exit after their pseudo-children pseudochildren
children have exited.
A way to mark a pseudo-processes as running detached from their parent (so that the parent would not
have to wait() for them if it doesn't want to) will be provided in future.
CAVEATS AND LIMITATIONS
BEGIN blocks
The fork() emulation will not work entirely correctly when called from within a BEGIN block.
The forked copy will run the contents of the BEGIN block, but will not continue parsing the
source stream after the BEGIN block. For example, consider the following code:
BEGIN {
fork and exit; # fork child and exit the parent
print "inner\n";
}
print "outer\n";
This will print:
inner
rather than the expected:
inner
outer
This limitation arises from fundamental technical difficulties in cloning and restarting the
stacks used by the Perl parser in the middle of a parse.
Open filehandles
Any filehandles open at the time of the fork() will be dup()-ed. Thus, the files can be
closed independently in the parent and child, but beware that the dup()-ed handles will still
share the same seek pointer. Changing the seek position in the parent will change it in the
child and vice-versa. One can avoid this by opening files that need distinct seek pointers
separately in the child.
Forking pipe open() not yet implemented
The "open(FOO, "|-")" and "open(BAR, "-|")" constructs are not yet implemented. This limita-tion limitation
tion can be easily worked around in new code by creating a pipe explicitly. The following
example shows how to write to a forked child:
# simulate open(FOO, "|-")
sub pipe_to_fork ($) {
my $parent = shift;
pipe my $child, $parent or die;
my $pid = fork();
die "fork() failed: $!" unless defined $pid;
if ($pid) {
close $child;
}
else {
close $parent;
open(STDIN, "<&=" . fileno($child)) or die;
}
$pid;
}
if (pipe_to_fork('FOO')) {
# parent
print FOO "pipe_to_fork\n";
close FOO;
}
else {
# child
while (<STDIN>) { print; }
exit(0);
}
And this one reads from the child:
# simulate open(FOO, "-|")
sub pipe_from_fork ($) {
my $parent = shift;
pipe $parent, my $child or die;
my $pid = fork();
die "fork() failed: $!" unless defined $pid;
if ($pid) {
close $child;
}
else {
close $parent;
open(STDOUT, ">&=" . fileno($child)) or die;
}
$pid;
}
if (pipe_from_fork('BAR')) {
# parent
while (<BAR>) { print; }
close BAR;
}
else {
# child
print "pipe_from_fork\n";
exit(0);
}
Forking pipe open() constructs will be supported in future.
Global state maintained by XSUBs
External subroutines (XSUBs) that maintain their own global state may not work correctly.
Such XSUBs will either need to maintain locks to protect simultaneous access to global data
from different pseudo-processes, or maintain all their state on the Perl symbol table, which
is copied naturally when fork() is called. A callback mechanism that provides extensions an
opportunity to clone their state will be provided in the near future.
Interpreter embedded in larger application
The fork() emulation may not behave as expected when it is executed in an application which
embeds a Perl interpreter and calls Perl APIs that can evaluate bits of Perl code. This
stems from the fact that the emulation only has knowledge about the Perl interpreter's own
data structures and knows nothing about the containing application's state. For example, any
state carried on the application's own call stack is out of reach.
Thread-safety of extensions
Since the fork() emulation runs code in multiple threads, extensions calling into non-thread-safe non-threadsafe
safe libraries may not work reliably when calling fork(). As Perl's threading support gradu-ally gradually
ally becomes more widely adopted even on platforms with a native fork(), such extensions are
expected to be fixed for thread-safety.
BUGS
Having pseudo-process IDs be negative integers breaks down for the integer "-1" because the
wait() and waitpid() functions treat this number as being special. The tacit assumption in
the current implementation is that the system never allocates a thread ID of 1 for user
threads. A better representation for pseudo-process IDs will be implemented in future.
In certain cases, the OS-level handles created by the pipe(), socket(), and accept() opera-tors operators
tors are apparently not duplicated accurately in pseudo-processes. This only happens in some
situations, but where it does happen, it may result in deadlocks between the read and write
ends of pipe handles, or inability to send or receive data across socket handles.
This document may be incomplete in some respects.
AUTHOR
Support for concurrent interpreters and the fork() emulation was implemented by ActiveState, with
funding from Microsoft Corporation.
This document is authored and maintained by Gurusamy Sarathy <gsar@activestate.com>.
SEE ALSO
"fork" in perlfunc, perlipc
perl v5.8.8 2006-01-07 PERLFORK(1)
|