PERLOPENTUT(1) Perl Programmers Reference Guide PERLOPENTUT(1)
NAME
perlopentut - tutorial on opening things in Perl
DESCRIPTION
Perl has two simple, built-in ways to open files: the shell way for convenience, and the C way for
precision. The shell way also has 2- and 3-argument forms, which have different semantics for han-dling handling
dling the filename. The choice is yours.
Open A la shell
Perl's "open" function was designed to mimic the way command-line redirection in the shell works.
Here are some basic examples from the shell:
$ myprogram file1 file2 file3
$ myprogram < inputfile
$ myprogram > outputfile
$ myprogram >> outputfile
$ myprogram | otherprogram
$ otherprogram | myprogram
And here are some more advanced examples:
$ otherprogram | myprogram f1 - f2
$ otherprogram 2>&1 | myprogram -$ myprogram$
$ myprogram <&3
$ myprogram >&4
Programmers accustomed to constructs like those above can take comfort in learning that Perl directly
supports these familiar constructs using virtually the same syntax as the shell.
Simple Opens
The "open" function takes two arguments: the first is a filehandle, and the second is a single string
comprising both what to open and how to open it. "open" returns true when it works, and when it
fails, returns a false value and sets the special variable $! to reflect the system error. If the
filehandle was previously opened, it will be implicitly closed first.
For example:
open(INFO, "datafile") || die("can't open datafile: $!");
open(INFO, "< datafile") || die("can't open datafile: $!");
open(RESULTS,"> runstats") || die("can't open runstats: $!");
open(LOG, ">> logfile ") || die("can't open logfile: $!");
If you prefer the low-punctuation version, you could write that this way:
open INFO, "< datafile" or die "can't open datafile: $!";
open RESULTS,"> runstats" or die "can't open runstats: $!";
open LOG, ">> logfile " or die "can't open logfile: $!";
A few things to notice. First, the leading less-than is optional. If omitted, Perl assumes that you
want to open the file for reading.
Note also that the first example uses the "||" logical operator, and the second uses "or", which has
lower precedence. Using "||" in the latter examples would effectively mean
open INFO, ( "< datafile" || die "can't open datafile: $!" );
which is definitely not what you want.
The other important thing to notice is that, just as in the shell, any whitespace before or after the
filename is ignored. This is good, because you wouldn't want these to do different things:
open INFO, "<datafile"
open INFO, "< datafile"
open INFO, "< datafile"
Ignoring surrounding whitespace also helps for when you read a filename in from a different file, and
forget to trim it before opening:
$filename = <INFO>; # oops, \n still there
open(EXTRA, "< $filename") || die "can't open $filename: $!";
This is not a bug, but a feature. Because "open" mimics the shell in its style of using redirection
arrows to specify how to open the file, it also does so with respect to extra whitespace around the
filename itself as well. For accessing files with naughty names, see "Dispelling the Dweomer".
There is also a 3-argument version of "open", which lets you put the special redirection characters
into their own argument:
open( INFO, ">", $datafile ) || die "Can't create $datafile: $!";
In this case, the filename to open is the actual string in $datafile, so you don't have to worry
about $datafile containing characters that might influence the open mode, or whitespace at the begin-ning beginning
ning of the filename that would be absorbed in the 2-argument version. Also, any reduction of unnec-essary unnecessary
essary string interpolation is a good thing.
Indirect Filehandles
"open"'s first argument can be a reference to a filehandle. As of perl 5.6.0, if the argument is
uninitialized, Perl will automatically create a filehandle and put a reference to it in the first
argument, like so:
open( my $in, $infile ) or die "Couldn't read $infile: $!";
while ( <$in> ) {
# do something with $_
}
close $in;
Indirect filehandles make namespace management easier. Since filehandles are global to the current
package, two subroutines trying to open "INFILE" will clash. With two functions opening indirect
filehandles like "my $infile", there's no clash and no need to worry about future conflicts.
Another convenient behavior is that an indirect filehandle automatically closes when it goes out of
scope or when you undefine it:
sub firstline {
open( my $in, shift ) && return scalar <$in>;
# no close() required
}
Pipe Opens
In C, when you want to open a file using the standard I/O library, you use the "fopen" function, but
when opening a pipe, you use the "popen" function. But in the shell, you just use a different redi-rection redirection
rection character. That's also the case for Perl. The "open" call remains the same--just its argu-ment argument
ment differs.
If the leading character is a pipe symbol, "open" starts up a new command and opens a write-only
filehandle leading into that command. This lets you write into that handle and have what you write
show up on that command's standard input. For example:
open(PRINTER, "| lpr -Plp1") || die "can't run lpr: $!";
print PRINTER "stuff\n";
close(PRINTER) || die "can't close lpr: $!";
If the trailing character is a pipe, you start up a new command and open a read-only filehandle lead-ing leading
ing out of that command. This lets whatever that command writes to its standard output show up on
your handle for reading. For example:
open(NET, "netstat -i -n |") || die "can't fork netstat: $!";
while (<NET>) { } # do something with input
close(NET) || die "can't close netstat: $!";
What happens if you try to open a pipe to or from a non-existent command? If possible, Perl will
detect the failure and set $! as usual. But if the command contains special shell characters, such
as ">" or "*", called 'metacharacters', Perl does not execute the command directly. Instead, Perl
runs the shell, which then tries to run the command. This means that it's the shell that gets the
error indication. In such a case, the "open" call will only indicate failure if Perl can't even run
the shell. See "How can I capture STDERR from an external command?" in perlfaq8 to see how to cope
with this. There's also an explanation in perlipc.
If you would like to open a bidirectional pipe, the IPC::Open2 library will handle this for you.
Check out "Bidirectional Communication with Another Process" in perlipc
The Minus File
Again following the lead of the standard shell utilities, Perl's "open" function treats a file whose
name is a single minus, "-", in a special way. If you open minus for reading, it really means to
access the standard input. If you open minus for writing, it really means to access the standard
output.
If minus can be used as the default input or default output, what happens if you open a pipe into or
out of minus? What's the default command it would run? The same script as you're currently running!
This is actually a stealth "fork" hidden inside an "open" call. See "Safe Pipe Opens" in perlipc for
details.
Mixing Reads and Writes
It is possible to specify both read and write access. All you do is add a "+" symbol in front of the
redirection. But as in the shell, using a less-than on a file never creates a new file; it only
opens an existing one. On the other hand, using a greater-than always clobbers (truncates to zero
length) an existing file, or creates a brand-new one if there isn't an old one. Adding a "+" for
read-write doesn't affect whether it only works on existing files or always clobbers existing ones.
open(WTMP, "+< /usr/adm/wtmp")
|| die "can't open /usr/adm/wtmp: $!";
open(SCREEN, "+> lkscreen")
|| die "can't open lkscreen: $!";
open(LOGFILE, "+>> /var/log/applog"
|| die "can't open /var/log/applog: $!";
The first one won't create a new file, and the second one will always clobber an old one. The third
one will create a new file if necessary and not clobber an old one, and it will allow you to read at
any point in the file, but all writes will always go to the end. In short, the first case is sub-stantially substantially
stantially more common than the second and third cases, which are almost always wrong. (If you know
C, the plus in Perl's "open" is historically derived from the one in C's fopen(3S), which it ulti-mately ultimately
mately calls.)
In fact, when it comes to updating a file, unless you're working on a binary file as in the WTMP case
above, you probably don't want to use this approach for updating. Instead, Perl's -i flag comes to
the rescue. The following command takes all the C, C++, or yacc source or header files and changes
all their foo's to bar's, leaving the old version in the original filename with a ".orig" tacked on
the end:
$ perl -i.orig -pe 's/\bfoo\b/bar/g' *.[Cchy]
This is a short cut for some renaming games that are really the best way to update textfiles. See
the second question in perlfaq5 for more details.
Filters
One of the most common uses for "open" is one you never even notice. When you process the ARGV file-handle filehandle
handle using "<ARGV>", Perl actually does an implicit open on each file in @ARGV. Thus a program
called like this:
$ myprogram file1 file2 file3
Can have all its files opened and processed one at a time using a construct no more complex than:
while (<>) {
# do something with $_
}
If @ARGV is empty when the loop first begins, Perl pretends you've opened up minus, that is, the
standard input. In fact, $ARGV, the currently open file during "<ARGV>" processing, is even set to
"-" in these circumstances.
You are welcome to pre-process your @ARGV before starting the loop to make sure it's to your liking.
One reason to do this might be to remove command options beginning with a minus. While you can
always roll the simple ones by hand, the Getopts modules are good for this:
use Getopt::Std;
# -v, -D, -o ARG, sets $opt_v, $opt_D, $opt_o
getopts("vDo:");
# -v, -D, -o ARG, sets $args{v}, $args{D}, $args{o}
getopts("vDo:", \%args);
Or the standard Getopt::Long module to permit named arguments:
use Getopt::Long;
GetOptions( "verbose" => \$verbose, # --verbose
"Debug" => \$debug, # --Debug
"output=s" => \$output );
# --output=somestring or --output somestring
Another reason for preprocessing arguments is to make an empty argument list default to all files:
@ARGV = glob("*") unless @ARGV;
You could even filter out all but plain, text files. This is a bit silent, of course, and you might
prefer to mention them on the way.
@ARGV = grep { -f && -T } @ARGV;
If you're using the -n or -p command-line options, you should put changes to @ARGV in a "BEGIN{}"
block.
Remember that a normal "open" has special properties, in that it might call fopen(3S) or it might
called popen(3S), depending on what its argument looks like; that's why it's sometimes called "magic
open". Here's an example:
$pwdinfo = `domainname` =~ /^(\(none\))?$/
? '< /etc/passwd'
: 'ypcat passwd |';
open(PWD, $pwdinfo)
or die "can't open $pwdinfo: $!";
This sort of thing also comes into play in filter processing. Because "<ARGV>" processing employs
the normal, shell-style Perl "open", it respects all the special things we've already seen:
$ myprogram f1 "cmd1|" - f2 "cmd2|" f3 < tmpfile
That program will read from the file f1, the process cmd1, standard input (tmpfile in this case), the
f2 file, the cmd2 command, and finally the f3 file.
Yes, this also means that if you have files named "-" (and so on) in your directory, they won't be
processed as literal files by "open". You'll need to pass them as "./-", much as you would for the
rm program, or you could use "sysopen" as described below.
One of the more interesting applications is to change files of a certain name into pipes. For exam-
ple, to autoprocess gzipped or compressed files by decompressing them with gzip:
@ARGV = map { /^\.(gz|Z)$/ ? "gzip -dc $_ |" : $_ } @ARGV;
Or, if you have the GET program installed from LWP, you can fetch URLs before processing them:
@ARGV = map { m#^\w+://# ? "GET $_ |" : $_ } @ARGV;
It's not for nothing that this is called magic "<ARGV>". Pretty nifty, eh?
Open A la C
If you want the convenience of the shell, then Perl's "open" is definitely the way to go. On the
other hand, if you want finer precision than C's simplistic fopen(3S) provides you should look to
Perl's "sysopen", which is a direct hook into the open(2) system call. That does mean it's a bit
more involved, but that's the price of precision.
"sysopen" takes 3 (or 4) arguments.
sysopen HANDLE, PATH, FLAGS, [MASK]
The HANDLE argument is a filehandle just as with "open". The PATH is a literal path, one that
doesn't pay attention to any greater-thans or less-thans or pipes or minuses, nor ignore whitespace.
If it's there, it's part of the path. The FLAGS argument contains one or more values derived from
the Fcntl module that have been or'd together using the bitwise "|" operator. The final argument,
the MASK, is optional; if present, it is combined with the user's current umask for the creation mode
of the file. You should usually omit this.
Although the traditional values of read-only, write-only, and read-write are 0, 1, and 2 respec-tively, respectively,
tively, this is known not to hold true on some systems. Instead, it's best to load in the appropri-ate appropriate
ate constants first from the Fcntl module, which supplies the following standard flags:
O_RDONLY Read only
O_WRONLY Write only
O_RDWR Read and write
O_CREAT Create the file if it doesn't exist
O_EXCL Fail if the file already exists
O_APPEND Append to the file
O_TRUNC Truncate the file
O_NONBLOCK Non-blocking access
Less common flags that are sometimes available on some operating systems include "O_BINARY",
"O_TEXT", "O_SHLOCK", "O_EXLOCK", "O_DEFER", "O_SYNC", "O_ASYNC", "O_DSYNC", "O_RSYNC", "O_NOCTTY",
"O_NDELAY" and "O_LARGEFILE". Consult your open(2) manpage or its local equivalent for details.
(Note: starting from Perl release 5.6 the "O_LARGEFILE" flag, if available, is automatically added to
the sysopen() flags because large files are the default.)
Here's how to use "sysopen" to emulate the simple "open" calls we had before. We'll omit the "|| die
$!" checks for clarity, but make sure you always check the return values in real code. These aren't
quite the same, since "open" will trim leading and trailing whitespace, but you'll get the idea.
To open a file for reading:
open(FH, "< $path");
sysopen(FH, $path, O_RDONLY);
To open a file for writing, creating a new file if needed or else truncating an old file:
open(FH, "> $path");
sysopen(FH, $path, O_WRONLY | O_TRUNC | O_CREAT);
To open a file for appending, creating one if necessary:
open(FH, ">> $path");
sysopen(FH, $path, O_WRONLY | O_APPEND | O_CREAT);
To open a file for update, where the file must already exist:
open(FH, "+< $path");
sysopen(FH, $path, O_RDWR);
And here are things you can do with "sysopen" that you cannot do with a regular "open". As you'll
see, it's just a matter of controlling the flags in the third argument.
To open a file for writing, creating a new file which must not previously exist:
sysopen(FH, $path, O_WRONLY | O_EXCL | O_CREAT);
To open a file for appending, where that file must already exist:
sysopen(FH, $path, O_WRONLY | O_APPEND);
To open a file for update, creating a new file if necessary:
sysopen(FH, $path, O_RDWR | O_CREAT);
To open a file for update, where that file must not already exist:
sysopen(FH, $path, O_RDWR | O_EXCL | O_CREAT);
To open a file without blocking, creating one if necessary:
sysopen(FH, $path, O_WRONLY | O_NONBLOCK | O_CREAT);
Permissions A la mode
If you omit the MASK argument to "sysopen", Perl uses the octal value 0666. The normal MASK to use
for executables and directories should be 0777, and for anything else, 0666.
Why so permissive? Well, it isn't really. The MASK will be modified by your process's current
"umask". A umask is a number representing disabled permissions bits; that is, bits that will not be
turned on in the created files' permissions field.
For example, if your "umask" were 027, then the 020 part would disable the group from writing, and
the 007 part would disable others from reading, writing, or executing. Under these conditions, pass-
ing "sysopen" 0666 would create a file with mode 0640, since "0666 & ~027" is 0640.
You should seldom use the MASK argument to "sysopen()". That takes away the user's freedom to choose
what permission new files will have. Denying choice is almost always a bad thing. One exception
would be for cases where sensitive or private data is being stored, such as with mail folders, cookie
files, and internal temporary files.
Obscure Open Tricks
Re-Opening Files (dups)
Sometimes you already have a filehandle open, and want to make another handle that's a duplicate of
the first one. In the shell, we place an ampersand in front of a file descriptor number when doing
redirections. For example, "2>&1" makes descriptor 2 (that's STDERR in Perl) be redirected into
descriptor 1 (which is usually Perl's STDOUT). The same is essentially true in Perl: a filename that
begins with an ampersand is treated instead as a file descriptor if a number, or as a filehandle if a
string.
open(SAVEOUT, ">&SAVEERR") || die "couldn't dup SAVEERR: $!";
open(MHCONTEXT, "<&4") || die "couldn't dup fd4: $!";
That means that if a function is expecting a filename, but you don't want to give it a filename
because you already have the file open, you can just pass the filehandle with a leading ampersand.
It's best to use a fully qualified handle though, just in case the function happens to be in a dif-
ferent package:
somefunction("&main::LOGFILE");
This way if somefunction() is planning on opening its argument, it can just use the already opened
handle. This differs from passing a handle, because with a handle, you don't open the file. Here
you have something you can pass to open.
If you have one of those tricky, newfangled I/O objects that the C++ folks are raving about, then
this doesn't work because those aren't a proper filehandle in the native Perl sense. You'll have to
use fileno() to pull out the proper descriptor number, assuming you can:
use IO::Socket;
$handle = IO::Socket::INET->new("www.perl.com:80");
$fd = $handle->fileno;
somefunction("&$fd"); # not an indirect function call
It can be easier (and certainly will be faster) just to use real filehandles though:
use IO::Socket;
local *REMOTE = IO::Socket::INET->new("www.perl.com:80");
die "can't connect" unless defined(fileno(REMOTE));
somefunction("&main::REMOTE");
If the filehandle or descriptor number is preceded not just with a simple "&" but rather with a "&="
combination, then Perl will not create a completely new descriptor opened to the same place using the
dup(2) system call. Instead, it will just make something of an alias to the existing one using the
fdopen(3S) library call This is slightly more parsimonious of systems resources, although this is
less a concern these days. Here's an example of that:
$fd = $ENV{"MHCONTEXTFD"};
open(MHCONTEXT, "<&=$fd") or die "couldn't fdopen $fd: $!";
If you're using magic "<ARGV>", you could even pass in as a command line argument in @ARGV something
like "<&=$MHCONTEXTFD", but we've never seen anyone actually do this.
Dispelling the Dweomer
Perl is more of a DWIMmer language than something like Java--where DWIM is an acronym for "do what I
mean". But this principle sometimes leads to more hidden magic than one knows what to do with. In
this way, Perl is also filled with dweomer, an obscure word meaning an enchantment. Sometimes,
Perl's DWIMmer is just too much like dweomer for comfort.
If magic "open" is a bit too magical for you, you don't have to turn to "sysopen". To open a file
with arbitrary weird characters in it, it's necessary to protect any leading and trailing whitespace.
Leading whitespace is protected by inserting a "./" in front of a filename that starts with white-
space. Trailing whitespace is protected by appending an ASCII NUL byte ("\0") at the end of the
string.
$file =~ s#^(\s)#./$1#;
open(FH, "< $file\0") || die "can't open $file: $!";
This assumes, of course, that your system considers dot the current working directory, slash the
directory separator, and disallows ASCII NULs within a valid filename. Most systems follow these
conventions, including all POSIX systems as well as proprietary Microsoft systems. The only vaguely
popular system that doesn't work this way is the "Classic" Macintosh system, which uses a colon where
the rest of us use a slash. Maybe "sysopen" isn't such a bad idea after all.
If you want to use "<ARGV>" processing in a totally boring and non-magical way, you could do this
first:
# "Sam sat on the ground and put his head in his hands.
# 'I wish I had never come here, and I don't want to see
# no more magic,' he said, and fell silent."
for (@ARGV) {
s#^([^./])#./$1#;
$_ .= "\0";
}
while (<>) {
# now process $_
}
But be warned that users will not appreciate being unable to use "-" to mean standard input, per the
standard convention.
Paths as Opens
You've probably noticed how Perl's "warn" and "die" functions can produce messages like:
Some warning at scriptname line 29, <FH> line 7.
That's because you opened a filehandle FH, and had read in seven records from it. But what was the
name of the file, rather than the handle?
If you aren't running with "strict refs", or if you've turned them off temporarily, then all you have
to do is this:
open($path, "< $path") || die "can't open $path: $!";
while (<$path>) {
# whatever
}
Since you're using the pathname of the file as its handle, you'll get warnings more like
Some warning at scriptname line 29, </etc/motd> line 7.
Single Argument Open
Remember how we said that Perl's open took two arguments? That was a passive prevarication. You
see, it can also take just one argument. If and only if the variable is a global variable, not a
lexical, you can pass "open" just one argument, the filehandle, and it will get the path from the
global scalar variable of the same name.
$FILE = "/etc/motd";
open FILE or die "can't open $FILE: $!";
while (<FILE>) {
# whatever
}
Why is this here? Someone has to cater to the hysterical porpoises. It's something that's been in
Perl since the very beginning, if not before.
Playing with STDIN and STDOUT
One clever move with STDOUT is to explicitly close it when you're done with the program.
END { close(STDOUT) || die "can't close stdout: $!" }
If you don't do this, and your program fills up the disk partition due to a command line redirection,
it won't report the error exit with a failure status.
You don't have to accept the STDIN and STDOUT you were given. You are welcome to reopen them if
you'd like.
open(STDIN, "< datafile")
|| die "can't open datafile: $!";
open(STDOUT, "> output")
|| die "can't open output: $!";
And then these can be accessed directly or passed on to subprocesses. This makes it look as though
the program were initially invoked with those redirections from the command line.
It's probably more interesting to connect these to pipes. For example:
$pager = $ENV{PAGER} || "(less || more)";
open(STDOUT, "| $pager")
|| die "can't fork a pager: $!";
This makes it appear as though your program were called with its stdout already piped into your
pager. You can also use this kind of thing in conjunction with an implicit fork to yourself. You
might do this if you would rather handle the post processing in your own program, just in a different
process:
head(100);
while (<>) {
print;
}
sub head {
my $lines = shift || 20;
return if $pid = open(STDOUT, "|-"); # return if parent
die "cannot fork: $!" unless defined $pid;
while (<STDIN>) {
last if --$lines < 0;
print;
}
exit;
}
This technique can be applied to repeatedly push as many filters on your output stream as you wish.
Other I/O Issues
These topics aren't really arguments related to "open" or "sysopen", but they do affect what you do
with your open files.
Opening Non-File Files
When is a file not a file? Well, you could say when it exists but isn't a plain file. We'll check
whether it's a symbolic link first, just in case.
if (-l $file || ! -f _) {
print "$file is not a plain file\n";
}
What other kinds of files are there than, well, files? Directories, symbolic links, named pipes,
Unix-domain sockets, and block and character devices. Those are all files, too--just not plain
files. This isn't the same issue as being a text file. Not all text files are plain files. Not all
plain files are text files. That's why there are separate "-f" and "-T" file tests.
To open a directory, you should use the "opendir" function, then process it with "readdir", carefully
restoring the directory name if necessary:
opendir(DIR, $dirname) or die "can't opendir $dirname: $!";
while (defined($file = readdir(DIR))) {
# do something with "$dirname/$file"
}
closedir(DIR);
If you want to process directories recursively, it's better to use the File::Find module. For exam-
ple, this prints out all files recursively and adds a slash to their names if the file is a direc-tory. directory.
tory.
@ARGV = qw(.) unless @ARGV;
use File::Find;
find sub { print $File::Find::name, -d && '/', "\n" }, @ARGV;
This finds all bogus symbolic links beneath a particular directory:
find sub { print "$File::Find::name\n" if -l && !-e }, $dir;
As you see, with symbolic links, you can just pretend that it is what it points to. Or, if you want
to know what it points to, then "readlink" is called for:
if (-l $file) {
if (defined($whither = readlink($file))) {
print "$file points to $whither\n";
} else {
print "$file points nowhere: $!\n";
}
}
Opening Named Pipes
Named pipes are a different matter. You pretend they're regular files, but their opens will normally
block until there is both a reader and a writer. You can read more about them in "Named Pipes" in
perlipc. Unix-domain sockets are rather different beasts as well; they're described in "Unix-Domain
TCP Clients and Servers" in perlipc.
When it comes to opening devices, it can be easy and it can be tricky. We'll assume that if you're
opening up a block device, you know what you're doing. The character devices are more interesting.
These are typically used for modems, mice, and some kinds of printers. This is described in "How do
I read and write the serial port?" in perlfaq8 It's often enough to open them carefully:
sysopen(TTYIN, "/dev/ttyS1", O_RDWR | O_NDELAY | O_NOCTTY)
# (O_NOCTTY no longer needed on POSIX systems)
or die "can't open /dev/ttyS1: $!";
open(TTYOUT, "+>&TTYIN")
or die "can't dup TTYIN: $!";
$ofh = select(TTYOUT); $| = 1; select($ofh);
print TTYOUT "+++at\015";
$answer = <TTYIN>;
With descriptors that you haven't opened using "sysopen", such as sockets, you can set them to be
non-blocking using "fcntl":
use Fcntl;
my $old_flags = fcntl($handle, F_GETFL, 0)
or die "can't get flags: $!";
fcntl($handle, F_SETFL, $old_flags | O_NONBLOCK)
or die "can't set non blocking: $!";
Rather than losing yourself in a morass of twisting, turning "ioctl"s, all dissimilar, if you're
going to manipulate ttys, it's best to make calls out to the stty(1) program if you have it, or else
use the portable POSIX interface. To figure this all out, you'll need to read the termios(3) man-page, manpage,
page, which describes the POSIX interface to tty devices, and then POSIX, which describes Perl's
interface to POSIX. There are also some high-level modules on CPAN that can help you with these
games. Check out Term::ReadKey and Term::ReadLine.
Opening Sockets
What else can you open? To open a connection using sockets, you won't use one of Perl's two open
functions. See "Sockets: Client/Server Communication" in perlipc for that. Here's an example. Once
you have it, you can use FH as a bidirectional filehandle.
use IO::Socket;
local *FH = IO::Socket::INET->new("www.perl.com:80");
For opening up a URL, the LWP modules from CPAN are just what the doctor ordered. There's no file-handle filehandle
handle interface, but it's still easy to get the contents of a document:
use LWP::Simple;
$doc = get('http://www.linpro.no/lwp/');
Binary Files
On certain legacy systems with what could charitably be called terminally convoluted (some would say
broken) I/O models, a file isn't a file--at least, not with respect to the C standard I/O library.
On these old systems whose libraries (but not kernels) distinguish between text and binary streams,
to get files to behave properly you'll have to bend over backwards to avoid nasty problems. On such
infelicitous systems, sockets and pipes are already opened in binary mode, and there is currently no
way to turn that off. With files, you have more options.
Another option is to use the "binmode" function on the appropriate handles before doing regular I/O
on them:
binmode(STDIN);
binmode(STDOUT);
while (<STDIN>) { print }
Passing "sysopen" a non-standard flag option will also open the file in binary mode on those systems
that support it. This is the equivalent of opening the file normally, then calling "binmode" on the
handle.
sysopen(BINDAT, "records.data", O_RDWR | O_BINARY)
|| die "can't open records.data: $!";
Now you can use "read" and "print" on that handle without worrying about the non-standard system I/O
library breaking your data. It's not a pretty picture, but then, legacy systems seldom are. CP/M
will be with us until the end of days, and after.
On systems with exotic I/O systems, it turns out that, astonishingly enough, even unbuffered I/O
using "sysread" and "syswrite" might do sneaky data mutilation behind your back.
while (sysread(WHENCE, $buf, 1024)) {
syswrite(WHITHER, $buf, length($buf));
}
Depending on the vicissitudes of your runtime system, even these calls may need "binmode" or
"O_BINARY" first. Systems known to be free of such difficulties include Unix, the Mac OS, Plan 9,
and Inferno.
File Locking
In a multitasking environment, you may need to be careful not to collide with other processes who
want to do I/O on the same files as you are working on. You'll often need shared or exclusive locks
on files for reading and writing respectively. You might just pretend that only exclusive locks
exist.
Never use the existence of a file "-e $file" as a locking indication, because there is a race condi-
tion between the test for the existence of the file and its creation. It's possible for another
process to create a file in the slice of time between your existence check and your attempt to create
the file. Atomicity is critical.
Perl's most portable locking interface is via the "flock" function, whose simplicity is emulated on
systems that don't directly support it such as SysV or Windows. The underlying semantics may affect
how it all works, so you should learn how "flock" is implemented on your system's port of Perl.
File locking does not lock out another process that would like to do I/O. A file lock only locks out
others trying to get a lock, not processes trying to do I/O. Because locks are advisory, if one
process uses locking and another doesn't, all bets are off.
By default, the "flock" call will block until a lock is granted. A request for a shared lock will be
granted as soon as there is no exclusive locker. A request for an exclusive lock will be granted as
soon as there is no locker of any kind. Locks are on file descriptors, not file names. You can't
lock a file until you open it, and you can't hold on to a lock once the file has been closed.
Here's how to get a blocking shared lock on a file, typically used for reading:
use 5.004;
use Fcntl qw(:DEFAULT :flock);
open(FH, "< filename") or die "can't open filename: $!";
flock(FH, LOCK_SH) or die "can't lock filename: $!";
# now read from FH
You can get a non-blocking lock by using "LOCK_NB".
flock(FH, LOCK_SH | LOCK_NB)
or die "can't lock filename: $!";
This can be useful for producing more user-friendly behaviour by warning if you're going to be block-
ing:
use 5.004;
use Fcntl qw(:DEFAULT :flock);
open(FH, "< filename") or die "can't open filename: $!";
unless (flock(FH, LOCK_SH | LOCK_NB)) {
$| = 1;
print "Waiting for lock...";
flock(FH, LOCK_SH) or die "can't lock filename: $!";
print "got it.\n"
}
# now read from FH
To get an exclusive lock, typically used for writing, you have to be careful. We "sysopen" the file
so it can be locked before it gets emptied. You can get a nonblocking version using "LOCK_EX |
LOCK_NB".
use 5.004;
use Fcntl qw(:DEFAULT :flock);
sysopen(FH, "filename", O_WRONLY | O_CREAT)
or die "can't open filename: $!";
flock(FH, LOCK_EX)
or die "can't lock filename: $!";
truncate(FH, 0)
or die "can't truncate filename: $!";
# now write to FH
Finally, due to the uncounted millions who cannot be dissuaded from wasting cycles on useless vanity
devices called hit counters, here's how to increment a number in a file safely:
use Fcntl qw(:DEFAULT :flock);
sysopen(FH, "numfile", O_RDWR | O_CREAT)
or die "can't open numfile: $!";
# autoflush FH
$ofh = select(FH); $| = 1; select ($ofh);
flock(FH, LOCK_EX)
or die "can't write-lock numfile: $!";
$num = <FH> || 0;
seek(FH, 0, 0)
or die "can't rewind numfile : $!";
print FH $num+1, "\n"
or die "can't write numfile: $!";
truncate(FH, tell(FH))
or die "can't truncate numfile: $!";
close(FH)
or die "can't close numfile: $!";
IO Layers
In Perl 5.8.0 a new I/O framework called "PerlIO" was introduced. This is a new "plumbing" for all
the I/O happening in Perl; for the most part everything will work just as it did, but PerlIO also
brought in some new features such as the ability to think of I/O as "layers". One I/O layer may in
addition to just moving the data also do transformations on the data. Such transformations may
include compression and decompression, encryption and decryption, and transforming between various
character encodings.
Full discussion about the features of PerlIO is out of scope for this tutorial, but here is how to
recognize the layers being used:
The three-(or more)-argument form of "open" is being used and the second argument contains some-
thing else in addition to the usual '<', '>', '>>', '|' and their variants, for example:
open(my $fh, "<:utf8", $fn);
The two-argument form of "binmode" is being used, for example
binmode($fh, ":encoding(utf16)");
For more detailed discussion about PerlIO see PerlIO; for more detailed discussion about Unicode and
I/O see perluniintro.
SEE ALSO
The "open" and "sysopen" functions in perlfunc(1); the system open(2), dup(2), fopen(3), and
fdopen(3) manpages; the POSIX documentation.
AUTHOR and COPYRIGHT
Copyright 1998 Tom Christiansen.
This documentation is free; you can redistribute it and/or modify it under the same terms as Perl
itself.
Irrespective of its distribution, all code examples in these files are hereby placed into the public
domain. You are permitted and encouraged to use this code in your own programs for fun or for profit
as you see fit. A simple comment in the code giving credit would be courteous but is not required.
HISTORY
First release: Sat Jan 9 08:09:11 MST 1999
perl v5.8.8 2006-01-07 PERLOPENTUT(1)
|