SPAMASSASSIN-RUN(1) User Contributed Perl Documentation SPAMASSASSIN-RUN(1)
NAME
spamassassin - simple front-end filtering script for SpamAssassin
SYNOPSIS
spamassassin [options] [ < mailmessage | path ... ]
spamassassin -d [ < mailmessage | path ... ]
spamassassin -r [ < mailmessage | path ... ]
spamassassin -k [ < mailmessage | path ... ]
spamassassin -W|-R [ < mailmessage | path ... ]
Options:
-L, --local Local tests only (no online tests)
-r, --report Report message as spam
-k, --revoke Revoke message as spam
-d, --remove-markup Remove spam reports from a message
-C path, --configpath=path, --config-file=path
Path to standard configuration dir
-p prefs, --prefspath=file, --prefs-file=file
Set user preferences file
--siteconfigpath=path Path for site configs
(def: /etc/mail/spamassassin)
--cf='config line' Additional line of configuration
-x, --nocreate-prefs Don't create user preferences file
-e, --exit-code Exit with a non-zero exit code if the
tested message was spam
--mbox read in messages in mbox format
--mbx read in messages in UW mbx format
-t, --test-mode Pipe message through and add extra
report to the bottom
--lint Lint the rule set: report syntax errors
-W, --add-to-whitelist Add addresses in mail to persistent address whitelist
--add-to-blacklist Add addresses in mail to persistent address blacklist
-R, --remove-from-whitelist Remove all addresses found in mail from
persistent address list
--add-addr-to-whitelist=addr Add addr to persistent address whitelist
--add-addr-to-blacklist=addr Add addr to persistent address blacklist
--remove-addr-from-whitelist=addr Remove addr from persistent address list
--ipv4only, --ipv4-only, --ipv4 Disable attempted use of ipv6 for DNS
--progress Print progress bar
-D, --debug [area=n,...] Print debugging messages
-V, --version Print version
-h, --help Print usage message
DESCRIPTION
spamassassin is a simple front-end filter for SpamAssassin.
Using the SpamAssassin rule base, it uses a wide range of heuristic tests on mail headers and body
text to identify "spam", also known as unsolicited bulk email. Once identified, the mail is then
tagged as spam for later filtering using the user's own mail user-agent application.
The default tagging operations that take place are detailed in "TAGGING".
By default, message(s) are read in from STDIN (< mailmessage), or from specified files and
directories (path ...) STDIN and files are assumed to be in file format, with a single message per
file. Directories are assumed to be in a format where each file in the directory contains only one
message (directories are not recursed and filenames containing whitespace or beginning with "." or
"," are skipped). The options --mbox and --mbx can override the assumed format, see the appropriate
OPTION information below.
Please note that SpamAssassin is not designed to scan large messages. Don't feed messages larger than
about 500 KB to SpamAssassin, as this will consume a huge amount of memory.
OPTIONS
-e, --error-code, --exit-code
Exit with a non-zero error code, if the message is determined to be spam.
-h, --help
Print help message and exit.
-V, --version
Print version and exit.
-t, --test-mode
Test mode. Pipe message through and add extra report. Note that the report text assumes that
the message is spam, since in normal use it is only visible in this case. Pay attention to the
score instead.
If you run this with -d, the message will first have SpamAssassin markup removed before being
tested.
-r, --report
Report this message as manually-verified spam. This will submit the mail message read from STDIN
to various spam-blocker databases. Currently, these are the Distributed Checksum Clearinghouse
"http://www.rhyolite.com/anti-spam/dcc/", Pyzor "http://pyzor.sourceforge.net/", Vipul's Razor
"http://razor.sourceforge.net/", and SpamCop "http://www.spamcop.net/".
If the message contains SpamAssassin markup, the markup will be stripped out automatically before
submission. The support modules for DCC, Pyzor, and Razor must be installed for spam to be
reported to each service. SpamCop reports will have greater effect if you register and set the
"spamcop_to_address" option.
The message will also be submitted to SpamAssassin's learning systems; currently this is the
internal Bayesian statistical-filtering system (the BAYES rules). (Note that if you only want to
perform statistical learning, and do not want to report mail to third-parties, you should use the
"sa-learn" command directly instead.)
-k, --revoke
Revoke this message. This will revoke the mail message read from STDIN from various spam-blocker
databases. Currently, these are Vipul's Razor.
Revocation support for the Distributed Checksum Clearinghouse, Pyzor, and SpamCop is not
currently available.
If the message contains SpamAssassin markup, the markup will be stripped out automatically before
submission. The support modules for Razor must be installed for spam to be revoked from the
service.
The message will also be submitted as 'ham' (non-spam) to SpamAssassin's learning systems;
currently this is the internal Bayesian statistical-filtering system (the BAYES rules). (Note
that if you only want to perform statistical learning, and do not want to report mail to third-
parties, you should use the "sa-learn" command directly instead.)
--lint
Syntax check (lint) the rule set and configuration files, reporting typos and rules that do not
compile correctly. Exits with 0 if there are no errors, or greater than 0 if any errors are
found.
-W, --add-to-whitelist
Add all email addresses, in the headers and body of the mail message read from STDIN, to a
persistent address whitelist. Note that you must be running "spamassassin" or "spamd" with a
persistent address list plugin enabled for this to work.
--add-to-blacklist
Add all email addresses, in the headers and body of the mail message read from STDIN, to the
persistent address blacklist. Note that you must be running "spamassassin" or "spamd" with a
persistent address list plugin enabled for this to work.
-R, --remove-from-whitelist
Remove all email addresses, in the headers and body of the mail message read from STDIN, from a
persistent address list. STDIN must contain a full email message, so to remove a single address
you should use --remove-addr-from-whitelist instead.
Note that you must be running "spamassassin" or "spamd" with a persistent address list plugin
enabled for this to work.
--add-addr-to-whitelist
Add the named email address to a persistent address whitelist. Note that you must be running
"spamassassin" or "spamd" with a persistent address list plugin enabled for this to work.
--add-addr-to-blacklist
Add the named email address to a persistent address blacklist. Note that you must be running
"spamassassin" or "spamd" with a persistent address list plugin enabled for this to work.
--remove-addr-from-whitelist
Remove the named email address from a persistent address whitelist. Note that you must be
running "spamassassin" or "spamd" with a persistent address list plugin enabled for this to work.
--ipv4only, --ipv4-only, --ipv4
Do not use IPv6 for DNS tests. Normally, SpamAssassin will try to detect if IPv6 is available,
using only IPv4 if it is not. Use if the existing tests for IPv6 availablity produce incorrect
results or crashes.
-L, --local
Do only the ''local'' tests, ones that do not require an internet connection to operate.
Normally, SpamAssassin will try to detect whether you are connected to the net before doing these
tests anyway, but for faster checks you may wish to use this.
Note that SpamAssassin's network rules are run in parallel. This can cause overhead in terms of
the number of file descriptors required if --local is not used; it is recommended that the
minimum limit on fds be raised to at least 256 for safety.
-d, --remove-markup
Remove SpamAssassin markup (the "SpamAssassin results" report, X-Spam-Status headers, etc.) from
the mail message. The resulting message, which will be more or less identical to the original,
pre-SpamAssassin input, will be output to STDOUT.
(Note: the message will not be exactly identical; some headers will be reformatted due to some
features of the Mail::Internet package, but the body text will be.)
-C path, --configpath=path, --config-file=path
Use the specified path for locating the distributed configuration files. Ignore the default
directories (usually "/usr/share/spamassassin" or similar).
--siteconfigpath=path
Use the specified path for locating site-specific configuration files. Ignore the default
directories (usually "/etc/mail/spamassassin" or similar).
--cf='config line'
Add additional lines of configuration directly from the command-line, parsed after the
configuration files are read. Multiple --cf arguments can be used, and each will be considered
a separate line of configuration. For example:
spamassassin -t --cf="body NEWRULE /text/" --cf="score NEWRULE 3.0"
-p prefs, --prefspath=prefs, --prefs-file=prefs
Read user score preferences from prefs (usually "$HOME/.spamassassin/user_prefs").
--progress
Prints a progress bar (to STDERR) showing the current progress. This option will only be useful
if you are redirecting STDOUT (and not STDERR). In the case where no valid terminal is found
this option will behave very much like the --showdots option in other SpamAssassin programs.
-D [area,...], --debug [area,...]
Produce debugging output. If no areas are listed, all debugging information is printed.
Diagnostic output can also be enabled for each area individually; area is the area of the code to
instrument. For example, to produce diagnostic output on bayes, learn, and dns, use:
spamassassin -D bayes,learn,dns
Higher priority informational messages that are suitable for logging in normal circumstances are
available with an area of "info".
For more information about which areas (also known as channels) are available, please see the
documentation at:
C<http://wiki.apache.org/spamassassin/DebugChannels
-x, --nocreate-prefs
Disable creation of user preferences file.
--mbox
Specify that the input message(s) are in mbox format. mbox is a standard Unix message folder
format.
--mbx
Specify that the input message(s) are in UW .mbx format. mbx is the mailbox format used within
the University of Washington's IMAP implementation; see "http://www.washington.edu/imap/".
SEE ALSO
sa-learn(1) spamd(1) spamc(1) Mail::SpamAssassin::Conf(3) Mail::SpamAssassin(3)
PREREQUISITES
"Mail::SpamAssassin"
BUGS
See <http://issues.apache.org/SpamAssassin/
AUTHORS
The SpamAssassin(tm) Project <http://spamassassin.apache.org/
COPYRIGHT
SpamAssassin is distributed under the Apache License, Version 2.0, as described in the file "LICENSE"
included with the distribution.
POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 1:
=cut found outside a pod block. Skipping to next block.
perl v5.8.8 2007-06-19 SPAMASSASSIN-RUN(1)
|