tput(1) tput(1)
NAME
tput, reset - initialize a terminal or query terminfo database
SYNOPSIS
tput [-Ttype] capname [parms ... ]
tput [-Ttype] init
tput [-Ttype] reset
tput [-Ttype] longname
tput -S <<
tput -V
DESCRIPTION
The tput utility uses the terminfo database to make the values of terminal-dependent capabilities and
information available to the shell (see sh(1)), to initialize or reset the terminal, or return the
long name of the requested terminal type. The result depends upon the capability's type:
string
tput writes the string to the standard output. No trailing newline is supplied.
integer
tput writes the decimal value to the standard output, with a trailing newline.
boolean
tput simply sets the exit code (0 for TRUE if the terminal has the capability, 1 for
FALSE if it does not), and writes nothing to the standard output.
Before using a value returned on the standard output, the application should test the exit code
(e.g., $?, see sh(1)) to be sure it is 0. (See the EXIT CODES and DIAGNOSTICS sections.) For a com-
plete list of capabilities and the capname associated with each, see terminfo(1).
-Ttype indicates the type of terminal. Normally this option is unnecessary, because the default is
taken from the environment variable TERM. If -T is specified, then the shell variables LINES
and COLUMNS will be ignored,and the operating system will not be queried for the actual screen
size.
capname
indicates the capability from the terminfo database. When termcap support is compiled in, the
termcap name for the capability is also accepted.
parms If the capability is a string that takes parameters, the arguments parms will be instantiated
into the string.
Most parameters are numbers. Only a few terminfo capabilities require string parameters; tput
uses a table to decide which to pass as strings. Normally tput uses tparm (3X) to perform the
substitution. If no parameters are given for the capability, tput writes the string without
performing the substitution.
-S allows more than one capability per invocation of tput. The capabilities must be passed to
tput from the standard input instead of from the command line (see example). Only one capname
is allowed per line. The -S option changes the meaning of the 0 and 1 boolean and string exit
codes (see the EXIT CODES section).
Again, tput uses a table and the presence of parameters in its input to decide whether to use
tparm (3X), and how to interpret the parameters.
-V reports the version of ncurses which was used in this program, and exits.
init If the terminfo database is present and an entry for the user's terminal exists (see -Ttype,
above), the following will occur: (1) if present, the terminal's initialization strings will
be output (is1, is2, is3, if, iprog), (2) any delays (e.g., newline) specified in the entry
will be set in the tty driver, (3) tabs expansion will be turned on or off according to the
specification in the entry, and (4) if tabs are not expanded, standard tabs will be set (every
8 spaces). If an entry does not contain the information needed for any of the four above
activities, that activity will silently be skipped.
reset Instead of putting out initialization strings, the terminal's reset strings will be output if
present (rs1, rs2, rs3, rf). If the reset strings are not present, but initialization strings
are, the initialization strings will be output. Otherwise, reset acts identically to init.
longname
If the terminfo database is present and an entry for the user's terminal exists (see -Ttype
above), then the long name of the terminal will be put out. The long name is the last name in
the first line of the terminal's description in the terminfo database [see term(5)].
If tput is invoked by a link named reset, this has the same effect as tput reset. See tset for com-parison, comparison,
parison, which has similar behavior.
EXAMPLES
tput init
Initialize the terminal according to the type of terminal in the environmental variable TERM.
This command should be included in everyone's .profile after the environmental variable TERM has
been exported, as illustrated on the profile(5) manual page.
tput -T5620 reset
Reset an AT&T 5620 terminal, overriding the type of terminal in the environmental variable TERM.
tput cup 0 0
Send the sequence to move the cursor to row 0, column 0 (the upper left corner of the screen,
usually known as the "home" cursor position).
tput clear
Echo the clear-screen sequence for the current terminal.
tput cols
Print the number of columns for the current terminal.
tput -T450 cols
Print the number of columns for the 450 terminal.
bold=`tput smso` offbold=`tput rmso`
Set the shell variables bold, to begin stand-out mode sequence, and offbold, to end standout
mode sequence, for the current terminal. This might be followed by a prompt: echo
"${bold}Please type in your name: ${offbold}\c"
tput hc
Set exit code to indicate if the current terminal is a hard copy terminal.
tput cup 23 4
Send the sequence to move the cursor to row 23, column 4.
tput cup
Send the terminfo string for cursor-movement, with no parameters substituted.
tput longname
Print the long name from the terminfo database for the type of terminal specified in the envi-ronmental environmental
ronmental variable TERM.
tput -S <<!
> clear
> cup 10 10
> bold
> !
This example shows tput processing several capabilities in one invocation. It clears the
screen, moves the cursor to position 10, 10 and turns on bold (extra bright) mode. The list is
terminated by an exclamation mark (!) on a line by itself.
FILES
/usr/share/terminfo
compiled terminal description database
/usr/share/tabset/*
tab settings for some terminals, in a format appropriate to be output to the terminal (escape
sequences that set margins and tabs); for more information, see the "Tabs and Initialization"
section of terminfo(5)
EXIT CODES
If the -S option is used, tput checks for errors from each line, and if any errors are found, will
set the exit code to 4 plus the number of lines with errors. If no errors are found, the exit code
is 0. No indication of which line failed can be given so exit code 1 will never appear. Exit codes
2, 3, and 4 retain their usual interpretation. If the -S option is not used, the exit code depends
on the type of capname:
boolean
a value of 0 is set for TRUE and 1 for FALSE.
string a value of 0 is set if the capname is defined for this terminal type (the value of cap-name capname
name is returned on standard output); a value of 1 is set if capname is not defined for
this terminal type (nothing is written to standard output).
integer
a value of 0 is always set, whether or not capname is defined for this terminal type. To
determine if capname is defined for this terminal type, the user must test the value
written to standard output. A value of -1 means that capname is not defined for this
terminal type.
other reset or init may fail to find their respective files. In that case, the exit code is
set to 4 + errno.
Any other exit code indicates an error; see the DIAGNOSTICS section.
DIAGNOSTICS
tput prints the following error messages and sets the corresponding exit codes.
exit code error message
---------------------------------------------------------------------0 --------------------------------------------------------------------0
0 (capname is a numeric variable that is not specified in
the terminfo(1) database for this terminal type, e.g.
tput -T450 lines and tput -T2621 xmc)
1 no error message is printed, see the EXIT CODES section.
2 usage error
3 unknown terminal type or no terminfo database
4 unknown terminfo capability capname
>4 error occurred in -S
---------------------------------------------------------------------PORTABILITY --------------------------------------------------------------------PORTABILITY
PORTABILITY
The longname and -S options, and the parameter-substitution features used in the cup example, are not
supported in BSD curses or in AT&T/USL curses before SVr4.
SEE ALSO
clear(1), stty(1), tabs(1), terminfo(5).
tput(1)
|