B(3pm) Perl Programmers Reference Guide B(3pm)
NAME
B - The Perl Compiler
SYNOPSIS
use B;
DESCRIPTION
The "B" module supplies classes which allow a Perl program to delve into its own innards. It is the
module used to implement the "backends" of the Perl compiler. Usage of the compiler does not require
knowledge of this module: see the O module for the user-visible part. The "B" module is of use to
those who want to write new compiler backends. This documentation assumes that the reader knows a
fair amount about perl's internals including such things as SVs, OPs and the internal symbol table
and syntax tree of a program.
OVERVIEW
The "B" module contains a set of utility functions for querying the current state of the Perl inter-preter; interpreter;
preter; typically these functions return objects from the B::SV and B::OP classes, or their derived
classes. These classes in turn define methods for querying the resulting objects about their own
internal state.
Utility Functions
The "B" module exports a variety of functions: some are simple utility functions, others provide a
Perl program with a way to get an initial "handle" on an internal object.
Functions Returning "B::SV", "B::AV", "B::HV", and "B::CV" objects
For descriptions of the class hierarchy of these objects and the methods that can be called on them,
see below, "OVERVIEW OF CLASSES" and "SV-RELATED CLASSES".
sv_undef
Returns the SV object corresponding to the C variable "sv_undef".
sv_yes
Returns the SV object corresponding to the C variable "sv_yes".
sv_no
Returns the SV object corresponding to the C variable "sv_no".
svref_2object(SVREF)
Takes a reference to any Perl value, and turns the referred-to value into an object in the appro-priate appropriate
priate B::OP-derived or B::SV-derived class. Apart from functions such as "main_root", this is
the primary way to get an initial "handle" on an internal perl data structure which can then be
followed with the other access methods.
The returned object will only be valid as long as the underlying OPs and SVs continue to exist.
Do not attempt to use the object after the underlying structures are freed.
amagic_generation
Returns the SV object corresponding to the C variable "amagic_generation".
init_av
Returns the AV object (i.e. in class B::AV) representing INIT blocks.
check_av
Returns the AV object (i.e. in class B::AV) representing CHECK blocks.
begin_av
Returns the AV object (i.e. in class B::AV) representing BEGIN blocks.
end_av
Returns the AV object (i.e. in class B::AV) representing END blocks.
comppadlist
Returns the AV object (i.e. in class B::AV) of the global comppadlist.
regex_padav
Only when perl was compiled with ithreads.
main_cv
Return the (faked) CV corresponding to the main part of the Perl program.
Functions for Examining the Symbol Table
walksymtable(SYMREF, METHOD, RECURSE, PREFIX)
Walk the symbol table starting at SYMREF and call METHOD on each symbol (a B::GV object) visited.
When the walk reaches package symbols (such as "Foo::") it invokes RECURSE, passing in the symbol
name, and only recurses into the package if that sub returns true.
PREFIX is the name of the SYMREF you're walking.
For example:
# Walk CGI's symbol table calling print_subs on each symbol.
# Recurse only into CGI::Util::
walksymtable(\%CGI::, 'print_subs', sub { $_[0] eq 'CGI::Util::' },
'CGI::');
print_subs() is a B::GV method you have declared. Also see "B::GV Methods", below.
Functions Returning "B::OP" objects or for walking op trees
For descriptions of the class hierarchy of these objects and the methods that can be called on them,
see below, "OVERVIEW OF CLASSES" and "OP-RELATED CLASSES".
main_root
Returns the root op (i.e. an object in the appropriate B::OP-derived class) of the main part of
the Perl program.
main_start
Returns the starting op of the main part of the Perl program.
walkoptree(OP, METHOD)
Does a tree-walk of the syntax tree based at OP and calls METHOD on each op it visits. Each node
is visited before its children. If "walkoptree_debug" (see below) has been called to turn debug-ging debugging
ging on then the method "walkoptree_debug" is called on each op before METHOD is called.
walkoptree_debug(DEBUG)
Returns the current debugging flag for "walkoptree". If the optional DEBUG argument is non-zero,
it sets the debugging flag to that. See the description of "walkoptree" above for what the debug-ging debugging
ging flag does.
Miscellaneous Utility Functions
ppname(OPNUM)
Return the PP function name (e.g. "pp_add") of op number OPNUM.
hash(STR)
Returns a string in the form "0x..." representing the value of the internal hash function used by
perl on string STR.
cast_I32(I)
Casts I to the internal I32 type used by that perl.
minus_c
Does the equivalent of the "-c" command-line option. Obviously, this is only useful in a BEGIN
block or else the flag is set too late.
cstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string in C
source code.
perlstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string in Perl
source code.
class(OBJ)
Returns the class of an object without the part of the classname preceding the first "::". This
is used to turn "B::UNOP" into "UNOP" for example.
threadsv_names
In a perl compiled for threads, this returns a list of the special per-thread threadsv variables.
OVERVIEW OF CLASSES
The C structures used by Perl's internals to hold SV and OP information (PVIV, AV, HV, ..., OP, SVOP,
UNOP, ...) are modelled on a class hierarchy and the "B" module gives access to them via a true
object hierarchy. Structure fields which point to other objects (whether types of SV or types of OP)
are represented by the "B" module as Perl objects of the appropriate class.
The bulk of the "B" module is the methods for accessing fields of these structures.
Note that all access is read-only. You cannot modify the internals by using this module. Also, note
that the B::OP and B::SV objects created by this module are only valid for as long as the underlying
objects exist; their creation doesn't increase the reference counts of the underlying objects. Trying
to access the fields of a freed object will give incomprehensible results, or worse.
SV-RELATED CLASSES
B::IV, B::NV, B::RV, B::PV, B::PVIV, B::PVNV, B::PVMG, B::BM, B::PVLV, B::AV, B::HV, B::CV, B::GV,
B::FM, B::IO. These classes correspond in the obvious way to the underlying C structures of similar
names. The inheritance hierarchy mimics the underlying C "inheritance". For 5.9.1 and later this is:
B::SV
|
+--------------+----------+------------+
| | | |
B::PV B::IV B::NV B::RV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-----+----+------+-----+-----+
| | | | | |
B::BM B::AV B::GV B::HV B::CV B::IO
| |
B::PVLV |
B::FM
For 5.9.0 and earlier, PVLV is a direct subclass of PVMG, so the base of this diagram is
|
B::PVMG
|
+------+-----+----+------+-----+-----+
| | | | | | |
B::PVLV B::BM B::AV B::GV B::HV B::CV B::IO
|
|
B::FM
Access methods correspond to the underlying C macros for field access, usually with the leading
"class indication" prefix removed (Sv, Av, Hv, ...). The leading prefix is only left in cases where
its removal would cause a clash in method name. For example, "GvREFCNT" stays as-is since its abbre-viation abbreviation
viation would clash with the "superclass" method "REFCNT" (corresponding to the C function "SvRE-FCNT"). "SvREFCNT").
FCNT").
B::SV Methods
REFCNT
FLAGS
object_2svref
Returns a reference to the regular scalar corresponding to this B::SV object. In other words,
this method is the inverse operation to the svref_2object() subroutine. This scalar and other
data it points at should be considered read-only: modifying them is neither safe nor guaranteed
to have a sensible effect.
B::IV Methods
IV Returns the value of the IV, interpreted as a signed integer. This will be misleading if "FLAGS &
SVf_IVisUV". Perhaps you want the "int_value" method instead?
IVX
UVX
int_value
This method returns the value of the IV as an integer. It differs from "IV" in that it returns
the correct value regardless of whether it's stored signed or unsigned.
needs64bits
packiv
B::NV Methods
NV
NVX
B::RV Methods
RV
B::PV Methods
PV This method is the one you usually want. It constructs a string using the length and offset
information in the struct: for ordinary scalars it will return the string that you'd see from
Perl, even if it contains null characters.
RV Same as B::RV::RV, except that it will die() if the PV isn't a reference.
PVX This method is less often useful. It assumes that the string stored in the struct is null-termi-nated, null-terminated,
nated, and disregards the length information.
It is the appropriate method to use if you need to get the name of a lexical variable from a pad-name padname
name array. Lexical variable names are always stored with a null terminator, and the length field
(SvCUR) is overloaded for other purposes and can't be relied on here.
B::PVMG Methods
MAGIC
SvSTASH
B::MAGIC Methods
MOREMAGIC
precomp
Only valid on r-magic, returns the string that generated the regexp.
PRIVATE
TYPE
FLAGS
OBJ Will die() if called on r-magic.
PTR
REGEX
Only valid on r-magic, returns the integer value of the REGEX stored in the MAGIC.
B::PVLV Methods
TARGOFF
TARGLEN
TYPE
TARG
B::BM Methods
USEFUL
PREVIOUS
RARE
TABLE
B::GV Methods
is_empty
This method returns TRUE if the GP field of the GV is NULL.
NAME
SAFENAME
This method returns the name of the glob, but if the first character of the name is a control
character, then it converts it to ^X first, so that *^G would return "^G" rather than "\cG".
It's useful if you want to print out the name of a variable. If you restrict yourself to globs
which exist at compile-time then the result ought to be unambiguous, because code like "${"^G"} =
1" is compiled as two ops - a constant string and a dereference (rv2gv) - so that the glob is
created at runtime.
If you're working with globs at runtime, and need to disambiguate *^G from *{"^G"}, then you
should use the raw NAME method.
STASH
SV
IO
FORM
AV
HV
EGV
CV
CVGEN
LINE
FILE
FILEGV
GvREFCNT
FLAGS
B::IO Methods
LINES
PAGE
PAGE_LEN
LINES_LEFT
TOP_NAME
TOP_GV
FMT_NAME
FMT_GV
BOTTOM_NAME
BOTTOM_GV
SUBPROCESS
IoTYPE
IoFLAGS
IsSTD
Takes one arguments ( 'stdin' | 'stdout' | 'stderr' ) and returns true if the IoIFP of the object
is equal to the handle whose name was passed as argument ( i.e. $io->IsSTD('stderr') is true if
IoIFP($io) == PerlIO_stdin() ).
B::AV Methods
FILL
MAX
OFF
ARRAY
ARRAYelt
Like "ARRAY", but takes an index as an argument to get only one element, rather than a list of
all of them.
AvFLAGS
B::CV Methods
STASH
START
ROOT
GV
FILE
DEPTH
PADLIST
OUTSIDE
OUTSIDE_SEQ
XSUB
XSUBANY
For constant subroutines, returns the constant SV returned by the subroutine.
CvFLAGS
const_sv
B::HV Methods
FILL
MAX
KEYS
RITER
NAME
PMROOT
ARRAY
OP-RELATED CLASSES
"B::OP", "B::UNOP", "B::BINOP", "B::LOGOP", "B::LISTOP", "B::PMOP", "B::SVOP", "B::PADOP", "B::PVOP",
"B::LOOP", "B::COP".
These classes correspond in the obvious way to the underlying C structures of similar names. The
inheritance hierarchy mimics the underlying C "inheritance":
B::OP
|
+---------------+--------+--------+
| | | |
B::UNOP B::SVOP B::PADOP B::COP
,' `-.
/ `--.
B::BINOP B::LOGOP
|
|
B::LISTOP
,' `.
/ \
B::LOOP B::PMOP
Access methods correspond to the underlying C structre field names, with the leading "class indica-tion" indication"
tion" prefix ("op_") removed.
B::OP Methods
These methods get the values of similarly named fields within the OP data structure. See top of
"op.h" for more info.
next
sibling
name
This returns the op name as a string (e.g. "add", "rv2av").
ppaddr
This returns the function name as a string (e.g. "PL_ppaddr[OP_ADD]", "PL_ppaddr[OP_RV2AV]").
desc
This returns the op description from the global C PL_op_desc array (e.g. "addition" "array
deref").
targ
type
opt
static
flags
private
spare
B::UNOP METHOD
first
B::BINOP METHOD
last
B::LOGOP METHOD
other
B::LISTOP METHOD
children
B::PMOP Methods
pmreplroot
pmreplstart
pmnext
pmregexp
pmflags
pmdynflags
pmpermflags
precomp
pmoffset
Only when perl was compiled with ithreads.
B::SVOP METHOD
sv
gv
B::PADOP METHOD
padix
B::PVOP METHOD
pv
B::LOOP Methods
redoop
nextop
lastop
B::COP Methods
label
stash
stashpv
file
cop_seq
arybase
line
warnings
io
AUTHOR
Malcolm Beattie, "mbeattie@sable.ox.ac.uk"
perl v5.8.8 2001-09-21 B(3pm)
|