XSLoader(3pm) Perl Programmers Reference Guide XSLoader(3pm)
NAME
XSLoader - Dynamically load C libraries into Perl code
VERSION
Version 0.06
SYNOPSIS
package YourPackage;
use XSLoader;
XSLoader::load 'YourPackage', $YourPackage::VERSION;
DESCRIPTION
This module defines a standard simplified interface to the dynamic linking mechanisms available on
many platforms. Its primary purpose is to implement cheap automatic dynamic loading of Perl modules.
For a more complicated interface, see DynaLoader. Many (most) features of "DynaLoader" are not
implemented in "XSLoader", like for example the "dl_load_flags", not honored by "XSLoader".
Migration from "DynaLoader"
A typical module using DynaLoader starts like this:
package YourPackage;
require DynaLoader;
our @ISA = qw( OnePackage OtherPackage DynaLoader );
our $VERSION = '0.01';
bootstrap YourPackage $VERSION;
Change this to
package YourPackage;
use XSLoader;
our @ISA = qw( OnePackage OtherPackage );
our $VERSION = '0.01';
XSLoader::load 'YourPackage', $VERSION;
In other words: replace "require DynaLoader" by "use XSLoader", remove "DynaLoader" from @ISA, change
"bootstrap" by "XSLoader::load". Do not forget to quote the name of your package on the
"XSLoader::load" line, and add comma (",") before the arguments ($VERSION above).
Of course, if @ISA contained only "DynaLoader", there is no need to have the @ISA assignment at all;
moreover, if instead of "our" one uses the more backward-compatible
use vars qw($VERSION @ISA);
one can remove this reference to @ISA together with the @ISA assignment.
If no $VERSION was specified on the "bootstrap" line, the last line becomes
XSLoader::load 'YourPackage';
Backward compatible boilerplate
If you want to have your cake and eat it too, you need a more complicated boilerplate.
package YourPackage;
use vars qw($VERSION @ISA);
@ISA = qw( OnePackage OtherPackage );
$VERSION = '0.01';
eval {
require XSLoader;
XSLoader::load('YourPackage', $VERSION);
1;
} or do {
require DynaLoader;
push @ISA, 'DynaLoader';
bootstrap YourPackage $VERSION;
};
The parentheses about "XSLoader::load()" arguments are needed since we replaced "use XSLoader" by
"require", so the compiler does not know that a function "XSLoader::load()" is present.
This boilerplate uses the low-overhead "XSLoader" if present; if used with an antic Perl which has no
"XSLoader", it falls back to using "DynaLoader".
Order of initialization: early load()
Skip this section if the XSUB functions are supposed to be called from other modules only; read it
only if you call your XSUBs from the code in your module, or have a "BOOT:" section in your XS file
(see "The BOOT: Keyword" in perlxs). What is described here is equally applicable to the DynaLoader
interface.
A sufficiently complicated module using XS would have both Perl code (defined in YourPackage.pm) and
XS code (defined in YourPackage.xs). If this Perl code makes calls into this XS code, and/or this XS
code makes calls to the Perl code, one should be careful with the order of initialization.
The call to "XSLoader::load()" (or "bootstrap()") has three side effects:
if $VERSION was specified, a sanity check is done to ensure that the versions of the .pm and the
(compiled) .xs parts are compatible;
the XSUBs are made accessible from Perl;
if a "BOOT:" section was present in the .xs file, the code there is called.
Consequently, if the code in the .pm file makes calls to these XSUBs, it is convenient to have XSUBs
installed before the Perl code is defined; for example, this makes prototypes for XSUBs visible to
this Perl code. Alternatively, if the "BOOT:" section makes calls to Perl functions (or uses Perl
variables) defined in the .pm file, they must be defined prior to the call to "XSLoader::load()" (or
"bootstrap()").
The first situation being much more frequent, it makes sense to rewrite the boilerplate as
package YourPackage;
use XSLoader;
use vars qw($VERSION @ISA);
BEGIN {
@ISA = qw( OnePackage OtherPackage );
$VERSION = '0.01';
# Put Perl code used in the BOOT: section here
XSLoader::load 'YourPackage', $VERSION;
}
# Put Perl code making calls into XSUBs here
The most hairy case
If the interdependence of your "BOOT:" section and Perl code is more complicated than this (e.g., the
"BOOT:" section makes calls to Perl functions which make calls to XSUBs with prototypes), get rid of
the "BOOT:" section altogether. Replace it with a function "onBOOT()", and call it like this:
package YourPackage;
use XSLoader;
use vars qw($VERSION @ISA);
BEGIN {
@ISA = qw( OnePackage OtherPackage );
$VERSION = '0.01';
XSLoader::load 'YourPackage', $VERSION;
}
# Put Perl code used in onBOOT() function here; calls to XSUBs are
# prototype-checked.
onBOOT;
# Put Perl initialization code assuming that XS is initialized here
DIAGNOSTICS
Can't find '%s' symbol in %s
(F) The bootstrap symbol could not be found in the extension module.
Can't load '%s' for module %s: %s
(F) The loading or initialisation of the extension module failed. The detailed error follows.
Undefined symbols present after loading %s: %s
(W) As the message says, some symbols stay undefined although the extension module was correctly
loaded and initialised. The list of undefined symbols follows.
XSLoader::load('Your::Module', $Your::Module::VERSION)
(F) You tried to invoke "load()" without any argument. You must supply a module name, and option-ally optionally
ally its version.
LIMITATIONS
To reduce the overhead as much as possible, only one possible location is checked to find the exten-sion extension
sion DLL (this location is where "make install" would put the DLL). If not found, the search for the
DLL is transparently delegated to "DynaLoader", which looks for the DLL along the @INC list.
In particular, this is applicable to the structure of @INC used for testing not-yet-installed exten-sions. extensions.
sions. This means that running uninstalled extensions may have much more overhead than running the
same extensions after "make install".
BUGS
Please report any bugs or feature requests via the perlbug(1) utility.
SEE ALSO
DynaLoader
AUTHORS
Ilya Zakharevich originally extracted "XSLoader" from "DynaLoader".
CPAN version is currently maintained by Sebastien Aperghis-Tramoni <sebastien@aperghis.net>
Previous maintainer was Michael G Schwern <schwern@pobox.com>
COPYRIGHT
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
perl v5.8.8 2001-09-21 XSLoader(3pm)
|