< Previous PageNext Page > Hide TOC

Show When Run

Automator has two categories of users. The first is a user who creates a workflow by putting actions in a sequence that accomplishes a certain goal. This type of user can then save the workflow as an application which another user—a user of the second kind—can then double-click to run. If the workflow creator is the only user who can set the parameters of workflow actions (by choosing items and entering values in action views), users in the second category are at a disadvantage. They are compelled to accept the choices of the workflow creator.

To get around this problem, Automator has the Show When Run feature. If this feature is turned on for an action in a workflow, when Automator executes the workflow it displays the user interface (in whole or part) for the action when execution reaches that point. The workflow user—as opposed to the workflow creator—can then make the required settings before the action proceeds.

The following sections describe Show When Run in more detail, show what it looks like, and explain how developers can modify the default behavior.

Contents:

The “Show Action When Run” Option
Refining Show When Run


The “Show Action When Run” Option

The views of most actions in a workflow include a triangular disclosure button in their lower-left corner labeled “Options”. When a workflow creator clicks this control, the bottom of the view expands to expose a new set of controls. The number of controls in this disclosed view vary according to how the action view is configured. Figure 1 illustrates the two kinds of control sets.


Figure 1  The Show Action When Run option in two actions

The Show Action When Run option in two actions

In both exposed Option subviews, the first control is a check box labeled “Show Action When Run.” However, in the first action that check box is also the only control. If the check box is clicked in the first Option subview and the workflow is run, the action displays its entire user interface in a separate window, as shown in Figure 2.


Figure 2  Action displaying entire user interface in a window

Action displaying entire user interface in a window

The user makes selections and fills in information in this window and clicks Continue to have the action proceed.

In the second Option subview (as shown in Figure 1), when the user selected “Show Action When Run”, the two radio buttons under it were enabled. He or she then clicked the “Show Selected Items” button and selected the “Mail Message” check box in the table. As shown in Figure 3, when Automator reaches this action in the workflow, it displays this portion of the action view in a separate window.


Figure 3  Action displaying part of its user interface in a window

Action displaying part of its user interface in a window

In summary, an action may present one of three styles of the Show When Run feature:

Refining Show When Run

In the default Show When Run configuration, Automator displays the Options disclosure button and allows workflow creators to select one or more parts of the action view for Automator to display when the action is run in a workflow. Developers can refine the default appearance and behavior of the Show When Run feature in two ways: by specifying new values for certain Automator properties and by grouping controls in special boxes in Interface Builder.

Specifying Properties for Show When Run

These three general styles of the Show When Run feature discussed in “The Show Action When Run Option” are controlled by two Automator properties:

The default Show When Run configuration for actions is to have both properties turned on (that is, Automator assumes a value of <true/>.) In this style, the Option button is displayed, and when that button is clicked all “Show Action When Run” options are presented, including the table allowing workflow writers to select groups of controls to display to end users.

If you want only the “Show Action When Run” check box to appear in the exposed view under Options, specify <false/> for AMCanShowSelectedItemsWhenRun. If you don’t want the Options disclosure button to appear at all, specify <false/> for AMCanShowWhenRun.

Grouping User-Interface Objects

By default, Automator populates the selected-items table with check box items using the following algorithm:

  1. It goes through the items in the top level of the action view looking for eligible objects (such as pop-up menus, text fields, and buttons).

  2. When it finds an eligible object, it determines if there is a label to the left of the object; it there is, it uses the label in the selected-items table view.

  3. If it cannot find an associated label it uses an appropriate name such as “Text field 1” or “Item 3”. (The bottom action displayed in Figure 1 includes an “Item 1” check box in its table.)

These semi-arbitrary names that Automator assigns to some items in the table are often confusing to users. What does “Text field 1” refer to, especially if there is more than one text field? Moreover, it sometimes makes more sense to group related controls under one item. For example, if selection of an item in a pop-up menu results in a text field being enabled, the text field and the menu item belong together.

Interface Builder has been enhanced to give developers of Automator actions the ability to group individual objects on action views under a given name. When you have completed the procedure in Interface Builder, the Options subview presented to workflow creators will look more like the example in Figure 4, which contains no items with names such as “Item 1”.


Figure 4  An action with assigned groups in the selected-items table

An action with assigned groups in the selected-items table

To make named groups of action-view objects, complete the following procedure with the main.nib file open in Interface Builder:

  1. Make sure that the Automator palette is loaded. If the palette window does not have a palette named Cocoa-Automator, choose Tools > Palettes > Palette Preferences and load AMPalette.palette.

  2. Select the objects you want in the group by Shift-clicking each object in turn (Figure 5).

    Figure 5  Selecting objects for an action group

    Selecting objects for an action group
  3. Choose Layout > Make subview of > Automator Box. The grouped objects are enclosed by a colored rectangle.

    The Automator Box menu item is not available until the Cocoa-Automator palette has been loaded. To load this palette, select the Palettes pane in the Interface Builder preferences, click Add, and select AMPalette.palette in /Developer/Extras/Palettes.

  4. In the Attributes inspector (Command-1) enter a title for the group (Figure 6). This title is what appears in the selected-items table to identify the group.

    Figure 6  Assigning a title to the action group

    Assigning a title to the action group

The box that groups a set of controls in an action view is an instance of AMGroupBox, a subclass of NSBox created specifically for actions. Developers whose actions are based on AppleScript should keep in mind that the AMGroupBox instance changes the view hierarchy of the objects in an action view. However, because AMGroupBox is a subclass of NSBox, the “box” terminology still works in scripts.



< Previous PageNext Page > Hide TOC


© 2004, 2007 Apple Inc. All Rights Reserved. (Last updated: 2007-12-11)


Did this document help you?
Yes: Tell us what works for you.
It’s good, but: Report typos, inaccuracies, and so forth.
It wasn’t helpful: Tell us what would have helped.