ADC Home > Documentation > Hardware > Xserve > Input and Output Devices

Previous  Next

VGA Connector

As a build-to-order option, the Xserve slot load computer can have a video graphics card installed. The card has a VGA connector for the video monitor.

The VGA connector is a three-row DB-15 (also called mini sub D15) connector for use with a VGA, SVGA, or XGA monitor. Figure 3-5 shows the pin configuration and Table 3-8 lists the signals and pin assignments.

Figure 3-5 VGA connector

[image: ../art/q28_08.gif]

Table 3-8 Signals on the VGA connector


Pin Signal name Description
1 RED Red video signal
2 GREEN Green video signal
3 BLUE Blue video signal
4 n.c. No connect
5 GND Ground
6 RED_RTN Red video signal return
7 GREEN_RTN Green video signal return
8 BLUE_RTN Blue video signal return
9 n.c. No connect
10 GND Ground
11 n.c. No connect
12 SDA I2C data
13 HSYNC Horizontal synchronization signal
14 VSYNC Vertical synchronization signal
15 SCL I2C clock



Previous  Next

© 2003 Apple Computer, Inc. (Last Updated April 22, 2003)