< Previous PageNext Page > Hide TOC

Overview of PowerBook G4 - 15 inch

This chapter outlines the features of the PowerBook G4 computer, with emphasis on the changes from the previous models.

In this section:

New Features
Features
Appearance
Peripheral Devices
System Software


New Features

The features that have changed are listed here along with references to the sections that describe them. For a quick summary of the changes, see Table 1-1.

Table 1-1  Feature changes

Feature

Previous model

Current model

Processor

PowerPC G4

PowerPC G4

Processor clock speed

667 or 800 MHz

867 MHz or 1 GHz

Graphics IC

ATI Mobility Radeon 7500

ATI Mobility Radeon 9000

Graphics memory

32 MB of DDR

32 or 64 MB of DDR

Hard disk drive

30 GB on 667 MHz, 40 GB on 800 MHz, or 60 GB CTO

40 GB on 867 MHz and 60 GB on 1 GHz

AirPort Card

Standard on 800 MHz only

Standard on 1 GHz only

Battery bay

55.3 watt-hours battery bay

61 watt-hours battery bay

Power adapter

45 W power adapter

65 W power adapter

Removable media

DVD-ROM/CD-RW Combo drive

DVD-ROM/CD-RW Combo drive or a DVD-R/CD-RW SuperDrive

Hard drive option

Additional CTO hard drive support

No additional CTO hard drive support

Features

Here is a list of the features of the PowerBook G4 computer. Each feature is described in a later chapter, as indicated in the list.

Appearance

Figure 1-1 is a front view of the PowerBook G4 computer. Figure 1-2 is a back view showing the I/O ports.


Figure 1-1  Front view of the computer

Front view of the computer


Figure 1-2  Back view showing I/O ports

Back view showing I/O ports

Peripheral Devices

In addition to the devices that are included with the computer, several peripheral devices are available separately:

System Software

The PowerBook G4 computer comes with both Mac OS X version 10.2 and Mac OS 9.2.2 installed. Mac OS X is the default startup system. For the latest information, see the references listed in “Mac OS X” and “Mac OS 9.2.2.”

Here are a few items of interest about the system software on the PowerBook G4 computer.

Open Firmware

System software on all current Macintosh models uses a design based on Open Firmware. With this approach, the ROM on the main logic board contains only the Open Firmware code needed to initialize the hardware and load an operating system. The rest of the system code is loaded into RAM from disk or from the network. For more information, see the references listed in “Open Firmware.”

Computer Identification

Rather than reading the box flag or the model string and then making assumptions about the computer’s features, applications that need to find out the features of the computer should use IORegistry calls to test for the features they require. IORegistry calls are part of the I/O Kit API. For more information, see the references listed at “I/O Kit.”

Asset management software that reports the kind of computer it is running on can obtain the value of the model property from the IOService plane of the IORegistry. For the PowerBook G4 computer, the value of the model property is PowerBook3,5.

Power-Saving Features

The PowerBook G4 computer has several profiles to save power. These profiles are labeled on the Energy Saver panel of System Preferences.

Reduced Processor Speed

Reduced processor speed allows the software to change the processor’s clock speed, slowing down to conserve power or speeding up when more speed is needed. The slower clock speed is 667 MHz and the L3 cache is turned off.

Operating Modes

The power management protocols on the PowerBook G4 computer support two power-saving modes: idle and sleep.

The computer automatically enters Idle mode after several seconds of inactivity. If the computer is attached to a network, it is able to respond to service requests and other events directed to the computer while it is in Idle mode.

While it is connected to an AC power supply, the computer can also respond to network activity when it is in sleep mode. The user can enable this feature by selecting Wake-on-LAN in the Energy Saver control panel.

When operating on the battery in sleep mode, the computer consumes less than 1 watt of power, meeting the Energy Star power-saving standard. When operating on the power adapter in sleep mode, the combined computer and adapter consume 3 to 4 watts of power.

Important: Peripherals such as PCMCIA cards and USB devices that do not conform to the computer’s power management protocols prevent the computer from switching to sleep mode and so deny the user the benefits of this energy-saving mode. When such peripherals are attached to the computer, the operating system displays a dialog to inform the user that the computer no longer meets the Energy Star requirements.



< Previous PageNext Page > Hide TOC


© 2002 Apple Computer, Inc. All Rights Reserved. (Last updated: 2002-11-01)


Did this document help you?
Yes: Tell us what works for you.
It’s good, but: Report typos, inaccuracies, and so forth.
It wasn’t helpful: Tell us what would have helped.